681039
13
Zoom out
Zoom in
Previous page
1/50
Next page
LANCOM VP-100
쮿 Chapter 2: Basic configuration of the LANCOM VP
-
100
13
EN
If you do not wish to conduct the quick installation via keypad, then
simply confirm the values as suggested by the installation wizard and
configure the device via the web interface.
2.1.1 No local authentication
If local authentication in the LANCOM VoIP Router is not activated, the
LANCOM VP-100 merely requires a telephone number to register.
After starting the LANCOM VP-100, LANCOM Easy Setup appears in the
display. Use
 to select the language for the configuration and
confirm with
.
When requested to enter the 'Telephone number' enter the internal
telephone number or the SIP name for the device.
To enter alphanumerical characters you use the hash key to toggle the
input mode between digits, lower-case and upper-case letters.
Confirm your entries with the key
.
The LANCOM VP-100 now tries to register with the LANCOM VoIP Router with
the number entered:
쮿 Registration will succeed if the LANCOM VoIP Router is configured to
allow registration without authentication. If this is the case then the
telephone displays its name as 'VP-100'.
쮿 If it is not possible to carry out registration without authentication, then
LANCOM Easy Setup continues to request further information.
2.1.2 With local authentication
If local authentication in the LANCOM VoIP Router is activated, the LANCOM
VP-100 requires the telephone number, a registration ID and a registration
password to register.
After entering the telephone number you will be prompted for the
'Authentication Name'. Enter the 'Authentication user name' from the
entry for the SIP user here. Confirm your entries with the key
.
In the next step, enter the 'Password' from the entry for the SIP user.
Confirm your entries with the key
.
The LANCOM VP-100 now again tries to register with the LANCOM VoIP
Router with the number entered, the registration ID and the password.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom VP-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom VP-100 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom VP-100

Lancom VP-100 User Manual - German - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info