681039
12
Zoom out
Zoom in
Previous page
1/50
Next page
LANCOM VP-100
쮿 Chapter 2: Basic configuration of the LANCOM VP
-
100
12
EN
2 Basic configuration of the LANCOM VP-100
In order to make and receive telephone calls the LANCOM VP-100 requires a
connection to a SIP gateway at a public provider, a LANCOM VoIP Router or a
VoIP-capable PBX.
We will describe the configuration of the LANCOM VP-100 primarily
based on the web interface. Configuration via the keypad is also
possible. Information of configuration via the keypad can be found in
the description of the menu in the appendix (’Keypad navigation’
Page 44).
2.1 Quick installation via keypad (LANCOM Easy Setup)
The LANCOM VP-100 is optimally equipped for a quick and easy setup. The
start up is particularly easy with the LANCOM VP-100 when a LANCOM VoIP
Router is available in the LAN to regulate communications between VoIP
subscribers. In this situation, LANCOM Easy Setup can be used to enter all of
the parameters necessary for operating the LANCOM VP-100. The "normal"
configuration will be necessary to register the LANCOM VP-100 at a public SIP
provider or a VoIP-capable PBX.
Requirements for a successful quick installation: The LANCOM VoIP
Router has to work as the DHCP server in the LAN and control the
assignment of IP address information.
For the quick installation, all information is entered into the LANCOM VP-100
which is necessary for registration at the LANCOM VoIP Router. The procedure
differs depending on the setting for local authentication in the LANCOM VoIP
Router:
쮿 If there is no local authentication, any VoIP device can register at a
LANCOM VoIP Router as long as it sends (any) telephone number and
valid domain. The domain is communicated by DHCP from the LANCOM
VoIP Router to the devices in the LAN. Thus there is no need for terminal
devices to be entered explicitly into the LANCOM VoIP Router.
쮿 In case of local authentication, only devices with an explicit entry as a SIP
user can register with the LANCOM VoIP Router. The telephone number is
defined along with an authentication name and a password.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom VP-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom VP-100 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom VP-100

Lancom VP-100 User Manual - German - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info