680891
2016
Zoom out
Zoom in
Previous page
1/2025
Next page
ResponderInitiatorMessage
The exchange type does not match that of the remote
device. Please check the value under "Configure --> VPN
x (IKE)Exchange type mismatch (Main or
Aggressive mode)
--> Connection list --> Edit VPN remote site entry --> IKE
Exchange"
The IKE proposals do not match. -- > Check VPN rulesx (IKE)No proposal matched
The IKE proposals do not match. -- > Check VPN rulesx (IKE)No proposal matched
Please check the IKE groups on both sides under "Configure
--> VPN --> Connection parameters --> VPN remote site
identification --> IKE Group"
x (IKE)IKE group mismatch
The value for the lifetime is not supported. Please use a life
type in "sec = seconds" or "kb = kilobytes". Check this entry
under "Configure --> VPN --> Parameters --> Lifetime"
x (IKE)Life type unsupported (other than Kbytes
or seconds?)
The lifetime specified does not match that of the remote
device. Check this entry under "Configure --> VPN -->
Parameters --> Lifetime"
x (IKE)Lifetime mismatched
False entry of identity. Please correct your entry under
"Configure --> VPN --> IKE --> IKE key"
x (IKE)ID type value unsupported (other than IP
network, domain, or email)
The two sites are using different identities. Compare the
identification at both sites under "Configure --> VPN -->
IKE --> IKE key"
x (IKE)ID type mismatch (e.g. IP network,
domain, or email)
The incoming VPN connection could not be assigned to a
remote device.
x (IKE)No rule matched ID - unknown connection
or wrong ID (e.g. remote gateway
definition)
Please compare the preshared keys under "Configure -->
VPN --> IKE --> IKE key"
x (IKE)IKE key mismatch
Please compare the preshared keys under "Configure -->
VPN --> IKE --> IKE key"
x (IKE)IKE key mismatch
The number of VPN connections has overloaded the device's
memory. To maintain the stability of the device, no further
VPN connections should be established.
x (IKE)Out of memory
The number of VPN connections has overloaded the device's
memory. To maintain the stability of the device, no further
VPN connections should be established.
x (IKE)Out of memory
The incoming VPN connection could not be assigned to a
remote device. Please check the following parameters: ID
x (IKE)No rule matched IDs - unknown
connection or wrong ID (e.g. IP network
definition) type does not match (see this document), incorrect network
definition, VPN rules do not match (see VPN RULES).
The devices cannot agree on a matching proposal. Please
check the settings under "Configure --> VPN --> IKE -->
x (IPsec)x (IPsec)No proposal matched
IKE Proposals" and under "Configure --> VPN --> IPSec
parameters --> IPSec proposal lists".
Please check the PFS (Perfect Forward Sequence) under
"Configure --> VPN --> Connection parameters --> VPN
remote identification --> PFS Group"
IPSec PFS group mismatch
2016
Reference Manual
20 Appendix
2016


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom LCOS 9.10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom LCOS 9.10 in the language / languages: English as an attachment in your email.

The manual is 54,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info