680944

Lancom L-11 Manual

76
Zoom out
Zoom in
Previous page
1/102
Next page
Operating modes and functions
|
|
LANCOM Wireless L-11/IL-11
|
76
EN
For advanced users: systematic use of the LCR
• The first example has shown how connect charges can be reduced with
only a few entries. If you would like to put the least-cost router to optimal
use, detailed information is required with regard to the connect-charge
structure of the call-by-call providers. Next, decide how these rates and
rate zones can be best organized in the LANCOM Wireless IL-11 LCR ta-
ble. A variety of approaches are possible:
• Obvious options for saving telephone charges can be entered directly:
• '00' for international connections
• Entering a single '0' will initially reroute all numbers starting with a zero.
However, as neighboring local exchanges may also start with a '0' and
yet be billed as local calls, their prefixes should be listed separately to
prevent these calls from being rerouted. This strategy should also be ap-
plied to special prefixes such as '0800' etc.
• Another strategy aims to achieve the highest possible level of control
over the routing activities. Start with the prefixes of the local area and
then define the next larger zones. The closer, and thus less expensive,
tariff zones are set with longer prefixes, the remaining more distant pre-
fixes with a smaller number of digits.
This setting can be expanded and refined as required. Here are a number of
further ideas for your consideration:
• An area code is required to dial a number of local exchanges, but these
calls may be billed as local. If these areas have been routed using a gen-
eral entry, you could route the area codes that are billed as local calls via
the network prefix of your telephone company If the entry for the network
prefix is left empty, the entry will not be rerouted.
• Perhaps a large number of your ISDN connections go to the same area
codes. If most of your remote stations are in Bristol, for example, you can
reach these numbers using a specific provider.
• Study the various tariff zones. Check the Internet for the assignments of
area codes to zones. In Germany, for example, this is possible at:
'www.cheap-calls.com'.
Once you have found the area codes that you would like to reroute, you can
start assigning them to call-by-call providers. For this, you need the current
rates of as many telephone providers as possible. These can also be found
in the Internet. Addresses such as 'www.cheap-calls.com' (or
'www.focus.de' in Germany), for example, contain complete, up-to-date list-
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-11 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom L-11

Lancom L-11 User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info