680944
74
Zoom out
Zoom in
Previous page
1/102
Next page
Operating modes and functions
|
|
LANCOM Wireless L-11/IL-11
|
74
EN
mask to the device. On the basis of this IP address, the device then
determines the valid address pool for the DHCP assignment.
After a few seconds, all of the computers in the network will be
checked and are assigned a new IP address by the DHCP server as
required. The computers also receive additional parameters such as
the broadcast address, DNS server, default gateway, etc.
Manual configuration
If configuration using the LANconfig wizard is not for you, set the parameters
for the DHCP server manually: In LANconfig in the 'TCP/IP' configuration sec-
tion on the 'DHCP' tab or in the /Setup/DHCP-module menu).
4.5 The least-cost router (LANCOM Wireless IL-11)
The liberalization of the European telecommunications market has led to the
availability of a variety of providers (network operators) that often offer a
wide range of different charges. These providers also provide the option of
the preselection of a given network or the placement of long-distance calls
on a call-by-call basis without a contract with a specific provider. The prefix
of the provider must be dialed to access the desired network on a call-by-call
basis. The normal telephone number is dialed after the network identifica-
tion prefix.
Unfortunately, the most inexpensive rates vary from provider to provider
depending on the time of day and region. In the morning Provider 1, Provider
2 in the afternoon and possibly Provider 3 for international calls. To always
have the most economical connection for telephone calls, surfing the Internet
or transferring data to other networks, it would be necessary to decide which
provider is the least expensive before each connection. A LANCOM Wireless
IL-11 does this for you. Least-cost routing (LCR) is the function for this task.
You define once which providers have the most favorable charges for your
purposes, and the device automatically selects the most economical provider
for you, (regardless of whether you are using the router, the LANCAPI etc.).
4.5.1 Function of the LANCOM Wireless least-cost router
The LCR analyzes the digits dialed by the router or LANCAPI.
The unit checks the LCR table after each digit for a correspondence to a pre-
viously dialed number (prefix). If a suitable entry is found which is even valid
for the current time and date, the network identification prefix for the connec-
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-11 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom L-11

Lancom L-11 User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info