729369
43
Zoom out
Zoom in
Previous page
1/122
Next page
LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 2: Installation
43
EN
For safety reasons, interface ISDN 2 on the models LANCOM 1723
VoIP and LANCOM 1823 VoIP must not be directly or indirectly con-
nected to an external exchange (e.g. the telephone network)!
Combined ISDN-analog interface (FXO)
Default LANCOM 1723 VoIP and LANCOM 1823 VoIP
ISDN 1: TE mode, alternatively switchable to NT mode or as an inter-
face to the analog exchange line
ADSL connector (ADSL, ADSL 2, ADSL 2+)
Reset switch
The reset button offers two basic functions—boot (restart) and reset (to the
factory settings)—which are called by pressing the button for different
lengths of time.
Some devices simply cannot be installed under lock and key. There is conse-
quently a risk that the configuration will be deleted by someone pressing the
reset button too long. With the suitable setting, the behavior of the reset but-
ton can be controlled accordingly.
Reset button
This option controls the behavior of the reset button when it is pressed:
Ignore: The button is ignored.
Please observe the following notice: The settings 'Ignore' or 'Boot
only' makes it impossible to reset the configuration to the factory set-
tings. If the password is lost for a device with this setting, then there
is no way to access the configuration! The device may become unserv-
iceable, or it can only be operated in its current configuration.
Boot only: A press of the button prompts a restart, regardless of how
long the it is held down.
Reset-or-boot (standard setting): Press the button briefly to restart
the device. Pressing the button for 5 seconds or longer restarts the
device and resets the configuration to its factory settings. All LEDs on
Configuration tool Call
WEBconfig, Telnet Expert configuration > Setup > Config
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom 1823 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 1823 VoIP in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info