703844

Lanaform New Tech Manual

6
Zoom out
Zoom in
Previous page
1/38
Next page
EN
CONTROLS
A. Time display
B. Mode display
C. Speed display
a. On/Off button: Switch on the power supply and
press this button; the unit will start to operate. Press
the button a second time and the unit will shut
down.
b. Mode button: There are four different modes:
888, P1, P2 and P3. 888 is the manual mode. This
function allows you to set the speed and the time
yourself. P1, P2 and P3 are automatic modes in
which the speed and time are pre-programmed. In
these modes, the time button and the speed button are deactivated.
c. Time button: Press this button to set the time. Each press adds one minute. The display rolls back to 1 when 10 has
been reached.
d. Reset button: This resets all the programmes to their initial status.
e. Fast button: Press this button to increase the speed.
f. Slow button: Press this button to decrease the speed.
OPERATING INSTRUCTIONS
1. Connect the unit to the power supply and press the On/Off button. The unit will start to operate. If you press the
button a second time, the unit will return to the standby mode.
2. Please read the “Controls” chapter for full details of the various functions available.
3. If you want to use the unit in the “upright” position, stand on the unit before switching it on.
4. If you prefer another position, it is better to ask another person to help you operate the controls, or to start “upright”
and then change position.
5. For both your health and your safety, do not use the unit for more than 20 minutes per séance to avoid overstressing
your body.
DISPLAYS
Speed: 1 > 16
Time: from 1 to 10 minutes (initial setting: 10 minutes)
Mode: 888, P1, P2, P3 (Initial mode: 888)
MODES
888 Manual mode
In this mode, you can adjust the speed yourself, settings 1, 2, 3, 4, ......16.
P1 Programme 1
The speed changes cyclically. It starts at level 1 and increases successively by one level until level 16 is
reached. Then the level of intensity decreases by one level until level 1 is reached. The cycle then starts all
over again.
6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform New Tech at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform New Tech in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info