703844
5
Zoom out
Zoom in
Previous page
1/38
Next page
EN
ACCESSORIES
• 2 M8 x 20 bolts
• 2 M5 x 12 bolts
• 4 M6 x 30 bolts
• 1 M8 screwdriver
2 Locking knobs
• 4 M6 washers
• 2 M5 washers
• 2 M8 washers
ASSEMBLY INSTRUCTIONS
1) Insert the upper column into the lower column..
2) Lower the decorative ring to cover the connection between the two columns. Carefully align the holes in the ring with
the holes in the columns and secure with the two locking knobs.
3) Once the two columns have been assembled, place the support bar in position.
4) Use two M8 x 20 bolts and two M8 washers to attach the support bar to the column.
5) Place the control panel on top of the column and slide the connecting power cable inside the column.
6) Attach the control panel to the support bar using two M5 x 12 bolts and two M5 washers.
7) Connect the electrical power cable as shown in the diagram.
8) Insert the end of the lower column into the base of the unit such that the bolt holes are correctly aligned. Insert the
two M6 x 30 bolts with M6 washers into the holes in positions b and c and tighten them down. Insert the two M6 x
30 bolts with M6 washers into positions a and d and tighten them down.
Your unit is ready for use.
Power New Tech
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform New Tech at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform New Tech in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info