719427

Lanaform LA120125 Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
English 6 / 44
EN FR NL DE ES IT PL CS SK SL HR BG
MAINTENANCE
AND STORAGE
If the water contains too much calcium and
magnesium, it may deposit a “white powder”
in the device. If this foam is deposited on the
transducer (Fig. , point ), this means that
the device will not work properly.
do not use products
containing bleach to clean the
device. Use only washing-
up liquid or vinegar!
do not touch the heating
resistor (Fig.1, point 11)
before it has cooled down!
In the event of accidental
burns, consult a doctor!
Maintenance
We recommend:
1 Using fresh, distilled or deminer-
alised water each time it is used.
2 Cleaning the reservoir every
2 days and cleaning the
transducer every week.
3 Changing the water in the
reservoir every 2 days.
4 Cleaning the device (see expla-
nations below) and making sure
that all its parts are completely
dry when it is not in use.
To clean the transducer (Fig. , point ):
1 Put 2 to 5 drops of vinegar
on its surface and leave them
there for 2 to 5 minutes.
2 Brush the foam o the surface with
a soft brush (Fig. 1, point 12): Do not
use a hard tool to scrape the surface.
3 Do not use soap, solvent or spray
cleaner to clean the transducer.
To clean the reservoir (Fig. , point ) and
the lid (Fig. , point ):
1 Remove the ring seal (Fig.
1, point 3) of the lid.
2 Clean the reservoir, the lid and the
ring with water using a soft cloth
and vinegar if there are any foam or
limescale deposits on the inside.
3 Rinse the reservoir in clean water.
To clean the mist emission sprinkler tip
(Fig. , point ):
1 Clean this with a brush or damp cloth.
2 Rinse with clean water.
To clean the base (Fig. , point ):
1 Clean it with a little water and
possibly a little vinegar us-
ing a brush or soft tissue.
2 Do not use soap, solvent or spray
cleaner to clean the base.
do not immerse the base
in water and do not allow
water to enter the air inlet
(Fig. 1, point 9) and the
exhaust vent (Fig. 1, point 6)!
Storage
always switch the device
o, unplug it and empty it
before transporting it.
Having cleaned and dried the device, store
it in a dry, cool place out of the reach of
children.
BREAKDOWNS
AND REMEDIES
In the event of a malfunction under nor-
mal conditions of use, please refer to the
following list:
No mist.
If there is no light.
Check that the device is connected
and that there is no mains fault.
The water level in the
reservoir is too low.
Add water to the reservoir.
Water is leaking from the reservoir.
Check that the reservoir is
in the right position.
The temperature of the unit is too low.
Place the unit in a room at
room temperature for half
an hour prior to use.
Mist has an unusual smell.
The water has been standing
in the reservoir for too long.
Clean the reservoir and pour fresh,
distilled or demineralised water into it.
Low intensity.
Too much/too little water
in the reservoir.
Empty water out of the
reservoir or add water to it.
Sediment on the transducer.
Clean the transducer.
The water is too cold.
Use water that is at room temperature.
The water is not clean.
Clean the reservoir and pour fresh,
distilled or demineralised water into it.
TECHNICAL DATA
Reference: LA
Power supply: -V~, -Hz
Consumption: W (cool mist), W (warm
mist)
Reservoir capacity: .l
Maximum emission rate: ml/hr (cool
mist) and ml/hr (warm mist)
Dimensions: (L)*(W)*(H) mm
ADVICE ON WASTE
DISPOSAL
The packaging consists entirely of envi-
ronmentally-friendly materials that can be
taken to your local waste sorting centre to
be used as secondary materials. Cardboard
can be placed in a paper collection contain-
er. Packing lm must be taken to your local
sorting and recycling centre.
When you are no longer using the device,
dispose of it in an environmentally respon-
sible manner and in compliance with the
statutory requirements.
LIMITED WARRANTY
LANAFORM guarantees that this product
will be free from any material and work-
manship defects for a period of two years
from the date it was purchased, other than
as specied below.
The LANAFORM warranty does not cover
damage caused by normal wear and tear
on this product. In addition, the warranty
on this LANAFORM product does not cover
damage caused as a result of any abusive,
inappropriate or incorrect use, accident,
attachment of any unauthorised accesso-
ry, modication of the product or any oth-
er situation of whatever kind, beyond the
control of LANAFORM.
LANAFORM shall not be held liable for
any type of incidental, consequential or
special damage.
Any implied warranties of the product’s
tness for purpose are limited to a period
of two years from the original purchase
date on presentation of a copy of the proof
of purchase.
Upon receipt, LANAFORM will repair or
replace your device, as appropriate, and
return it to you. The warranty may only be
used at the LANAFORM Service Centre. Any
maintenance and repair work carried out
on this product by any person other than
the LANAFORM Service Centre will invali-
date this warranty.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform LA120125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA120125 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info