699083

Lamax Shield Plus Manual

16
Zoom out
Zoom in
Previous page
1/132
Next page
13
Internal Layout
Infrared Sensor
Infrared Sensor
LED
Tamper Switch
Mode Settings
Carefully remove the cover from the back of the sensor.
Infrared Sensors
Infrared sensors detect movement. Therefore always keep them clean. Do not touch the sensor.
Tamper Switch
If the PIR motion sensor cover is opened, the tamper switch sends a signal to the control panel.
LED
The LED on the front of PIR motion sensor can be switched on or o by moving the jumper.
Back of the PIR Motion Sensor
Test Mode
Press the test button and when auto-testing is complete the PIR motion sensors sends a signal to the
control panel.
Power Saving Mode
PIR sensor automatically goes into power saving mode if movement is detected twice in three minutes.
If movement is detected within the next three minutes it goes back into working mode. During those
three minutes the sensor cannot be activated and does not send a signal to the control panel. If the
sensor detects movement within the following three minutes, it goes into power saving mode for a
further three minutes.
Connecting a PIR Motion Sensor
IMPORTANT: When pairing a sensor, make sure the other sensors are not detecting movement.
Either cover these sensors or temporarily move them to a room where there will be no movement.
The sensors that are included are paired with the control panel by default.
To pair a PIR motion sensor, enter the control panel passcode and press the “RECORD” button. The bu-
tton will light up. Press the test button on the back of the sensor twice or make a movement in front of
the motion sensor. When you hear the beep, the PIR sensor is paired. If the control panel beeps twice,
it means the sensor has already been paired.
Installing a PIR Motion Sensor
Do not install sensor directly on a window, close to air conditioning, heating, refrigerator, oven, in
direct sunlight or in places where the temperature often varies. Avoid installing two sensors opposite
each other or covering the same range.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lamax Shield Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lamax Shield Plus in the language / languages: English, German, Polish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info