699083

Lamax Shield Plus Manual

12
Zoom out
Zoom in
Previous page
1/132
Next page
9
Changing Sensor Names
Each sensor can be named individually. The rst nine sensors (1-9) can be named using up to a ma-
ximum 30 characters. The names of sensors 10 and above can not be renamed. To check the sensor
name, send the code “91” - “99” to the control panel SIM card number.
Copy the received SMS text message and paste it into a new message. Then ll in the sensor name and
send it back to the control panel SIM card number.
Naming an RFID Tag
RFID tags can be named. If the owner of the tag disarms the alarm, the system sends a text message
to the preset phone number
IMPORTANT: Sending SMS only works if the RFID tag is named and the administrator phone number
to which it is sent is set.
Changing the RFID Tag Name
Each RFID tag can be named. To nd out the name of the tag, send the code number “10” to the control
panel SIM card number.
Copy the received SMS text message and paste it into a new message. Then ll in the tag names and
send the SMS back to the control panel SIM card number. The text message can contain several names.
Example:
Information about the names of individual chips might look like this:
Change RFID tag names:
1. Dad
2. Mum
3. Tomas
4. Sarah
Changing the Exit and Entry Delay Time
With this security system it is possible to set up a time delay when arming or disarming the alarm.
When set up, the control panel beeps every second and its frequency increases in the last 15 seconds.
To determine the length of the time delay, send the code number “11” to the control panel SIM card
number.
Copy the received SMS text message and paste it into a new message. Then set the length of the time
delay and send it back to the control panel SIM card number. Maximum time delay is 300 seconds.
Setting the Siren Volume and Ring Time
To determine the length and volume of the alarm, send the code number „12“ to the control panel SIM
card number.
Copy the received SMS text message and paste it into a new message. Fill in the alarm length and
volume and send it back to the control panel SIM card number.
Changing the Disarm Password
To determine the deactivation passcode, send code “13” to the control panel SIM card number.
Copy the received SMS text message and paste it into a new message. Fill in the new deactivation
password and send it back to the control panel SIM card number.
Setting Single Zone Delay Time
With this security system it is possible to set the entry and exit delay time for single zones. To deter-
mine the length of the delay time for each zone, sent the code number “14” to the control panel SIM
card number.
Copy the received SMS text message and paste it into a new message. Then set the length of the delay
time and send it back to the control panel SIM card number. The maximum length of the time delay
is 300 seconds.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lamax Shield Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lamax Shield Plus in the language / languages: English, German, Polish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info