699083
10
Zoom out
Zoom in
Previous page
1/132
Next page
7
??
- Store alarm phone No. - 5
- Store alarm SMS No. - 6
- Store SMS No. for RFID tags - 7
- Store speed dial phone No. - 8
???
- Zone name – 91-99
- RFS tags SMS notice - 10
- Entry and exit delay time - 11
- Siren volume and ringing time - 12
- Disarm password - 13
- Single zone delay time - 14
Changing the Language
Each language has its own four-digit code. Set the language by sending an SMS with the four-digit
code to the control panel SIM card number. Upon receipt the language change is made and the control
panel sends back a conrmation SMS.
NOTE: The language can also be set using the app.
Disarming the Alarm via SMS
By sending a text message with one question mark, a list of commands with numeric codes are dis-
played. Disarming the alarm is number “0. To disarm, send an SMS with this code to the control panel
SIM card number. When successfully disarmed, the control panel sends a conrmation SMS.
Arming the Alarm via SMS
The alarm can be armed in the same way as disarming. The code to activate the system is “1”. To arm the
system send this code via SMS to the control panel SIM card number. When armed, the control panel
sends a conrmation SMS.
Partial Alarm Activation via SMS (Home Mode)
Putting the alarm in home/stay mode works the same way as fully arming the system. The activation
code is “2. Send this code via SMS to the control panel SIM card number to put the system into home
mode. Upon activation, the control panel sends a conrmation SMS.
Two-Way Talk
To activate a two-way call send the code “3” to the control panel SIM card number. The system calls
back immediately to your phone and you can speak to someone through the control panel.
Leaving a Voice Memo
To leave a message send the code “4” to the control panel SIM card phone number. The system imme-
diately calls back to your phone number. Answer the phone and leave a message of no longer than 10
seconds. The message can be played back by holding an RFID tag to the reader on the control panel.
Control the System when Emergency Call Made
When the alarm is triggered, the control panel calls the preset numbers. The following commands can
be made by pressing the corresponding number code.
Command Code Number
Disarm 0
Arm 1
Turn O Siren 6
Turn On Siren 9
Two-Way Talk *
Play Emergency Message #
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lamax Shield Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lamax Shield Plus in the language / languages: English, German, Polish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info