811808
103
Zoom out
Zoom in
Previous page
1/116
Next page
SCHEDA TECNICA VALVOLA TERMOSTATICA VAST
Dati tecnici Materiali
Fluido: Acqua Corpo della valvola ed altre parti metalliche: Ottone forgiato
Pressione massima di esercizio: 10 bar Molla: Acciaio inox
Temperatura del uido: da 5 a 110°C Sensore: Ottone
Temperatura di apertura: 95°C (ssa) Tubo capillare: Rame
Isteresi: 6°C Guaina del tubo capillare: Acciaio
Temperatura ambiente: da 0 a 125°C Pozzetto sensore: Ottone
Capacità di usso: 2.4 m3/h alla pressione min. del usso di
1 bar e tempo sensore 110°C O-ring e guarnizioni: EPDM, NBR
Dimensioni attacco: Filettatura tubo G 3/4 ISO 228 Pulsante manuale: ABS
Lunghezza del tubo capillare: 1,3 m oppure 4m
APPLICAZIONE La valvola termostatica VAST è progettata per la protezione di caldaie a biomassa e forni. Evita il surriscaldamento della
caldaia scaricando acqua dal generatore di calore o dalla batteria di condensazione.
INSTALLAZIONE della valvola VAST sulla caldaia con scambiatore di calore di sicurezza. Prima di installare la valvola, lavare il sistema per
assicurare che non vi siano impurità che possono depositarsi sulle parti della valvola, causandone il cattivo funzionamento. Ricordare di
installare un ltro a monte della valvola. Il sensore può essere montato in qualsiasi posizione. Assicurarsi che tutto il sensore sia in contatto
con l’area tenuta sotto controllo. La freccia sul corpo della valvola indica la direzione del usso. Installando la valvola, assicurarsi che questa sia
posizionata in modo corretto. Massima coppia di serraggio per il pozzeto del sensore 30 Nm.
MANUTENZIONE Si raccomanda di vericare annualmente il corretto funzionamento della valvola, tramite personale qualicato. La prova
funzionale viene eettuata manualmente premendo il pulsante rosso che apre il usso della valvola. Il dado di serraggio del pulsante rosso
non deve essere allentato/manomesso per non causare il malfunzionamento della valvola.
THERMOSTATIC VALVE VAST TECHNICAL DATA SHEET
Technical Data Materials
Media: Water Valve body and other metal parts: forged brass
Max. Working Pressure: 10 bar Spring: stainless steel
Media temperature: 5 to 110°C Sensor: brass
Opening temperature: 9°C (xed) Capillary tube: copper
Hysteresis: 6°C. Sensor pocket: brass
Ambient temperature: O to 125°C O-rings and gaskets: EPDM, NBR
Flow capacity: 2.4 m3/h at min. 1 bar ow pressure and
sensor temp. 110°C Manual button ABS
Connection size: G3/4 pipe thread ISO 228 Pulsante manuale: ABS
Length of capillary tube: 1.3 m or 4 m
APPLICATION The Thermostatic Valve VAST is designed for protection of biomass boilers and re cookers It prevents overheating of the boiler
by discharging water from heat generator or condensing coil.
INSTALLATION of VAST valve on boiler with safety heat exchanger. Before installation of the valve ush the system to make sure that there are
no impurities which might deposit on the valve seat and cause malfunction. Remember to install a lter ahead of the valve. The sensor can be
mounted in any position. Make sure the whole sensor is in contact with the controlled area. The arrow on the valve body shows direction of
ow. When installing the valve, make sure it is positioned properly. Max torque for sensor pocket mounting is 30Nm.
SERVICE It is recommended to check proper function of the valve once a year by qualied personnel. Functional check is carried out manually
by depressing the red button that opens the ow on the valve. The nut fastening the red button must not be loosened as it will cause product
malfunction.
THERMOSTATISCH GESTEUERTE VENTIL VAST TECHNISCHE PROTOKOLLE
Technische Daten Werkstoe
Medien: Wasser Gehäuse und andere Metallteile: Geschmiedetes Messing
Max. Betriebsdruck: 10 bar Feder: Edelstahl
Medientemperatur: 5 bis 110°C Fühler: Messing
Önungstemperatur: 95°C (fest) Kapillarrohr: Kupfer
Hysterese: 6°C Tauchhülse: Messing
Umgebungstemperatur: 0 bis 125°C O-Ringe und Dichtungen: EPDM, NBR
Strömungsleistung: 2.4 m3/h bei min. Durchussdruck von 1 bar und
Fühlertemperatur 110°C Betätigungsknopf: ABS
Anschlussgröße: G3/4 Rohrgewinde ISO 228
Kapillarrohrlänge: 1.3 m oder 4 m
ANWENDUNG Das thermostatisch gesteuerte Ventil VAST ist für den Schutz von Biomassekesseln und Brennöfen ausgelegt. Durch das
Ablassen von Wasser aus dem Wärmeerzeuger oder der Kondensator-schlange wird eine Überhitzung vermieden.
ITALIANO26
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Nordica TERMOROSSELLA PLUS FORNO DSA 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Nordica TERMOROSSELLA PLUS FORNO DSA 4.0 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of La Nordica TERMOROSSELLA PLUS FORNO DSA 4.0

La Nordica TERMOROSSELLA PLUS FORNO DSA 4.0 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info