Manual La Nordica Termocamino Base DSA (page 33 of 104) (English, German, French, Italian, Spanish)

696298

Zoom out

Zoom in

1/104

ENGLISH

MAINTENANCE AND CARE

Check the external air intake, by cleaning it, at least once a year. The stack must be regularly swept by the chimney sweeper.

Let your chimney sweeper in charge of your area check the regular installation of the device, the connection to the stack and the aeration.

IMPORTANT: The maintenance must be carried out only and exclusively with cold device .You should only use spare parts

approved and supplied by La NORDICA S.p.A. . Please contact your specialized retailer if you require spare parts.

YOU MUST NOT MAKE ANY CHANGES TO THE DEVICE!!!

GLASS CLEANING

After having checked that the door is completely shut (lowered), unlock the upper latch (Picture 12 pos. A), open the ap and clean the glass,

then close the ap and lock the latch before lifting again the door.

Thanks to a specic inlet of secondary air, the accumulation of dirty sediments on the glass-door is reduced with ecacy. Nevertheless this can

never be avoided by using solid fuels ( particularly wet wood ) and it has not to be understood as a defect of the appliance.

IMPORTANT: The cleaning of the sight glass must be carried out only and exclusively with cold device to avoid the explosion

of the same. For the cleaning, it is possible to use specic products or a wet newspaper paper ball passed in the ash to rub it.

Do not use cloths, abrasive or chemically aggressive products by cleaning the hearth glass.

The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air regulator, enough draught

of the chimney-ue and the presence of combustion air are the essential elements for the optimal functioning of the appliance and for the

cleaning of the glass.

BREAK OF GLASSES: Given that the glass-ceramic glasses resist up to a heat shock of 750°C, they are not subject to thermal

shocks. Their break can be caused only by mechanic shocks (bumps or violent closure of the door, etc.). Therefore, their

replacement is not included in the warranty.

CLEANING OUT THE ASHES

All the devices are equipped with a hearth grating and an ash drawer for the collection of the ashes.

It is suggested to empty periodically the ash drawer and to avoid it lls completely in order not to overheat the grating. Moreover, it is

suggested to leave always 3-4 cm of ash in the hearth.

CAUTION: The ashes removed from the hearth have to be stored in a container made of re-resistant material equipped

with an air-tight cover. The container has to be placed on a re-resistant oor, far from ammable materials up to the

switching o and complete cooling.

CLEANING THE FLUE

The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air regulator, enough draught

of the chimney-ue and the presence of combustion air are the essential elements for the optimal functioning of the appliance.

The device should be completely cleaned at least once a year or every time it is a needed (in case of bad working and low yield). An excessive

deposit of soot can cause problems in the discharge of smokes and re in the ue.

The cleaning must be carried out exclusively with cold equipment. This operation should be carried out by a chimney sweeper

who can simultaneously perform an audit of the ue (checking of possible deposits).

SUMMER STOP

After cleaning the hearth, chimney and hood, totally eliminating the ash and other eventual residues, close all the doors of the hearth and

the relevant registers; in case you disconnect the appliance from the chimney you must close its openings in order to let work others possible

appliances connected to the same ue.

We suggest performing the cleaning operation of the ue at least once per year; verifying in the meantime the actual status of the rope seals,

which cannot ensure the good operation of the equipment if they are not in good condition and are not making a good seal! In this case the

seals must be replaced.

In presence of dampness in the room where the stove has been placed, we advise you to put absorbent salts into the hearth.



If you want to keep for long the aesthetic look of the cooker it is important to protect its internal walls in row cast iron with neutral

Vaseline.

Check the water level in the expansion tank and remove any air from the system by bleeding the radiators; also check to make sure that the

plumbing and electrical accessories (control unit, circulator) are working properly.

ATTENTION: For no reason must the re be ignited before the system has been completely lled with water; doing this would lead

to serious damage of the entire structure. The installation must always be full of water even when the appliance is not used.

CLEANING THE FIREPLACE

During cleaning remove the top cap of the replace which is located on the exhaust fumes pos. B Picture 10 (the rst time by the help of a

hammer as indicated in to the picture) and the top lock steel plate of the replace pos. E by turning and pulling it down.



ATTENTION: when you remove the cap and the top lock steel plate of the replace, the dirtiness that is inside the chamber of

exhaust fumes falls down, therefore avoid to dirty the inside of the replace.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of La Nordica Termocamino Base DSA in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

La Nordica Termocamino Base DSA Manual

Product: