643400
38
Zoom out
Zoom in
Previous page
1/56
Next page
38
Chapter 11
USER PARAMETERS
The adjustment is made on a percentage basis, and therefore any change of this parameter leads to a
proportional variation on all loading speeds of the stove.
To access the percentage adjustment of pellet feeding, you have to enter the user programming by pressing
button 3, and while keeping it pressed, press button 5.
At this point use button 5 to move through the menu until you see F blinking on D2.
If you go beyond this parameter unintentionally, exit by pressing button 1 and repeat the procedure.
The value 00 will be shown on D1: using buttons 2 and 3, you can set an increased/decreased percentage
at 5 point intervals (the parameter can be modi ed with a maximum scale from -50 to +50).
Adjustment Table
LACK OF
PELLETS
Increase the percentage by 5 percent and try the stove with this new setting for
at least half an hour. If the problem is reduced but not resolved, increase by a
further 5 percent. Repeat this process until the problem is resolved.
If the problem cannot be resolved, contact the service centre.
EXCESS
PELLETS
Decrease the value by 5 percent and try the stove with this new setting for at
least half an hour. If the problem is reduced but not resolved, decrease by a
further 5 percent. Repeat this process until the problem is resolved.
If the problem cannot be resolved, contact the service centre.
When the  nal adjustment has been made, press button 1 to con rm and exit the program.
HEAT DISTRIBUTION MOTOR PARAMETERS
These parameters enable you to carry out some operations regarding the heat distribution motor of the
Divina Plus stove.
To access these parameters, press button 3 and hold it down, then press button 5. Move through the menu
by pressing button 5 until a blinking G appears on D2.
Parameter Table
OFF G Distribution motor start/stop
00 H % setting of distribution motor
The parameter G is for enabling/disenabling operation of the distribution motor. Simply use buttons 2
and 3 on D1 to set on to enable or OFF to disenable the motor. To con rm and exit, press button 1. To
continue with programming, press button 5.
The parameter H enables you to make a percentage modi cation (therefore proportional on all the power
levels) of the speed of the distribution motor on the Divina Plus model.
Display D1 will show 00”: using buttons 2 and 3, you can increase/decrease the value at 5 point intervals
(the parameter can be modi ed with a maximum scale from -50 to +30). When the  nal adjustment has
been made, press button 1 or 5 to con rm and exit.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Nordica Babyfiamma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Nordica Babyfiamma in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of La Nordica Babyfiamma

La Nordica Babyfiamma User Manual - German - 56 pages

La Nordica Babyfiamma User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info