643400
36
Zoom out
Zoom in
Previous page
1/56
Next page
36
Chapter 11
USER PARAMETERS
Note: When the weekly programmer is on, the corresponding LED indicator on the control panel
is on (see description of indicator lights).
TO DISACTIVATE THE WEEKLY PROGRAMMER, enter the User Parameters by pressing button 3 and
holding it, then pressing button 5. Display D2 shows a blinking 0. Use button 2 or 3 to set OFF mode on
display D1. Press button 1 to con rm and exit.
Manual controls via the front panel or remote control take precedence over any programmed settings.
DAY/NIGHT TEMPERATURE FUNCTION
The day/night temperature function makes it possible to switch the stove on/o automatically based on
two selected temperatures. This function is particularly useful when the stove heat exceeds the setting of
the room thermostat (e.g. due to mid-season temperatures or a stove that is oversized with respect to the
space).
This system enables you to select one temperature for daytime and one for night.
Firstly, it is necessary to set the current time using the current time regulation sequence in order to give a
time reference to the function itself.
To access the parameters of the day/night temperature function, press button 3 and hold it down, then
press button 5 and release both buttons at the same time. When you have entered the function, press
button 5 to move to parameter b (D2=B).
Parameter b (D2 = B, D1 =Ex. “06.00” )
Press button 2 or 3 to set the day period beginning/night period end.
Press button 5 to con rm and go to the next parameter.
Parameter c (D2 = C, D1 =Ex. “22.00” )
Press button 2 or 3 to set the day period end/night period beginning.
Press button 5 to con rm and go to the next parameter.
Parameter d (D2 = D, D1 =Ex. “25°C” )
Press button 2 or 3 to set the maximum temperature for the day period.
Press button 5 to con rm and go to the next parameter.
Parameter E (D2 = E, D1 =Ex. “20°C” )
Press button 2 or 3 to set the maximum temperature for the night period.
Press button 1 to con rm and exit.
When you have exited from the programming, to activate/disactivate the function, press button 4 and
hold it down, press button 5, then release both buttons at the same time.
The corresponding LED on the control panel will light up/go o (see description in the table of indicator
lights).
The various parameters must be set with the stove switched off!
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Nordica Babyfiamma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Nordica Babyfiamma in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of La Nordica Babyfiamma

La Nordica Babyfiamma User Manual - German - 56 pages

La Nordica Babyfiamma User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info