17494
230
Zoom out
Zoom in
Previous page
1/260
Next page
Section 9 TROUBLESHOOTING
9-4
Message
“Add toner to resume copying.”
“Image cycle.” [“Now adding toner.”]
“Now restoring stored data in HDD.”
[“Please wait. Now maintaining stored
data.”]
“Replace the waste toner box.”
“Check the waste punch box.”
[“Check Punch Hole box.”]
“Out of staples. Add staples.”
[“Stapler empty. Add staples.”]
“Time for maintenance.”
“Time for replacing Felt Roller.”
[“Felt cleaning maintenance.”]
“Paper misfeed. Remove paper.”
“Open drawer xx, check and remove
paper from inside of the machine.”
[“Open cassette xx, check and remove
paper from inside of machine.”]
“Remove paper from inner tray of
Finisher.”
“Staple jam. Remove staples.”
[“Staple jam. Remove staple(s).”]
“Call service.”
Procedure
There is insufficient toner left in the copier to make copies. Add toner immediately.
Toner is now being added. Please wait until the operation is complete.
The Hard Disk is now being checked. Please wait until the operation is complete.
The waste toner box is full. Replace that box.
The hole punch chad box in the optional Document Finisher is full. Refer to the
Operation Guide for your Document Finisher and dispose of the hole punch chad.
There are no staples left in the optional Document Finisher. Refer to the Operation
Guide for your Document Finisher and load staples.
Periodic maintenance is required to keep your copier in good condition. Contact your
service representative or authorized service center as soon as possible.
It is time to replace certain parts in your copier. Contact your service representative
or authorized service center.
If paper misfeeds, the location of the misfeed will be indicated on the touch panel.
Leave the main switch ON ( | ) and follow the appropriate procedure to remove the
jammed paper.
Check to see if paper has misfed inside one of the drawer[cassette]. if it has, remove
the jammed paper.
There are still copies left in the optional Document Finisher. Remove all of the copies
from the Document Finisher.
Staples have jammed in the optional Document Finisher. Refer to the Operation
Guide for your Document Finisher and remove the jammed staples.
Open and then close the front cover. If this message still remains, make a note of the
number that displayed with the “C”, turn the main switch OFF (O), remove the power
plug from the outlet and contact your service representative or authorized service
center.
Reference
page
3-9
——
——
3-11
——
——
——
——
9-7
9-7
——
——
——
230


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM6330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM6330 in the language / languages: English as an attachment in your email.

The manual is 8,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kyocera KM6330

Kyocera KM6330 User Manual - Spanish - 260 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info