17494

Kyocera KM6330 Manual

229
Zoom out
Zoom in
Previous page
1/260
Next page
Section 9 TROUBLESHOOTING
9-3
Message
“Cannot staple. ___: maximum capacity
(Staple)”
[“Cannot staple. ___: Max. staples”]
“The output tray exceeds capacity.
Remove paper, and press “Start” key.”
[“Too much paper in output tray. Remove
paper, and press “Start” key.”]
“The output tray exceeds capacity.
Remove paper, and press “Continue”
key.”
[“Too much paper in output tray. Remove
paper, and press “Continue” key.”]
“Finisher paper capacity exceeded.
(Tray x) Remove paper, and press
“Start” key.”
“Finisher paper capacity exceeded.
(Tray x) Remove paper, and press
“Continue” key.”
“These functions cannot be combined.”
“Tandem Copy is cancelled. Unable to
Tandem Copy under current setting.”
[“Cancel tandem copy. Cannot tandem
copy with the present setting.”]
“Exceeds pre registered copying
quantity.”
[“Copy limit for this ID-code has been
reached. No copying possible.”]
“Insert key counter.”
“Memory full.”
“Memory full. Delete the registered data
in the box.”
[“Memory full. Delete the registered data
from box.”]
“Ready to copy.
Add toner.”
Procedure
The number of copies stapled in the optional Document Finisher has exceeded the
acceptable limit. For more detailed information, refer to the Operation Guide for your
Document Finisher.
The number of copies in the copy eject tray has exceeded the acceptable limit.
Remove the copies from the copy eject tray and then press the [Start] key.
When using the copier as a printer, the number of print outs in the copy eject tray
has exceeded the acceptable limit. Remove the print outs from the copy eject tray
and then touch the “Continue” key.
The number of copies in the designated tray of the optional Document Finisher has
exceeded the acceptable limit. Remove the copies from that tray and then press the
[Start] key.
When using the copier as a printer, the number of print outs in the designated tray of
the optional Document Finisher has exceeded the acceptable limit. Remove the print
outs from that tray and then touch the “Continue” key.
The function or mode that you just selected cannot be used in combination with the
currently set function or mode.
Tandem copying (option) is not possible. Touch the “Check” key and check the copy
settings.
The number of copies made under your department ID-code has reached the limit
that was set under the copy management mode and copying is no longer possible
with that code. Use the copy management mode to clear the copy count.
Insert the Key Counter securely into its opening.
The copier’s memory is full. Select whether you want to print out that data that is
already scanned or delete all of that data. It will not be possible to copy or scan
another original until one of these two operations is performed.
The memory for the document management function boxes is full. In order to register
new documents in any of the boxes, delete any unnecessary data.
There is insufficient toner left in the copier. Since only one copy can be made at a
time in this state, add toner as soon as possible.
Reference
page
——
——
——
——
——
——
——
7-8
8-7
——
6-1
3-9
… 229 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera KM6330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM6330 in the language / languages: English as an attachment in your email.

The manual is 8,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kyocera KM6330

Kyocera KM6330 User Manual - Spanish - 260 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info