435980
70
Zoom out
Zoom in
Previous page
1/76
Next page
Section 8 MAINTENANCE AND OPERATION INFORMATION
8-4
9 Hold the Process Unit stable and push on the areas marked
PUSH HERE” on the toner container, until the container
clicks into place.
10 Push the lock lever back into its locked position (away from
you).
Cleaning the charger and the registration roller
Perform the following cleaning operation whenever you replace the
toner container.
11 Slide the green-colored charger cleaner knob back and forth
2 to 3 times, then return it to its home position (marked
CLEANER HOME POSITION”).
IMPORTANT!
After cleaning, make sure you restore the charger
cleaner to its home position.
If the charger cleaner is not restored to the
CLEANER HOME POSITION”, a black band will
appear on subsequent copies.
12 Use the cleaning cloth that is supplied with the new toner
kit to wipe off any paper dust and dirt that has
accumulated on the metal registration roller (A) inside the
copier.
IMPORTANT!
While cleaning, be careful to avoid touching the black
transfer roller (B).
13 After cleaning is finished, align the pins (C) on both sides of
the Process Unit with the guides inside the copier, and slide
the Process Unit slowly back into its original position in the
copier until in stops.
(A)
(B)
(C) (C)
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera km 1500 laser 15ppm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera km 1500 laser 15ppm in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info