435980

Kyocera km 1500 laser 15ppm Manual

32
Zoom out
Zoom in
Previous page
1/76
Next page
Section 4 BASIC OPERATION
4-2
5 Adjusting the copy exposure
The copy exposure can be manually adjusted in all of the
image quality modes, except for the Auto Exposure
Adjustment mode. If you want to make the exposure
darker, press the right exposure adjustment key to move
the lit indicator to the right. If you want to make the
exposure lighter, press the left exposure adjustment key to
move the lit indicator to the left.
NOTE
The copy exposure scale can be set to either 5 or 7 levels
of adjustment.
6 Setting the number of copies to be made
Press the Number of Copies / Zoom(+) key if you want to
increase the number of copies to be made and the Number
of Copies / Zoom(-) key if you want to decrease the number
of copies to be made. You can also press the Number of
Copies / Zoom(-) key for at least 3 seconds to shift the
number of copies to be made from “1” up to “99” in one step,
or the Number of Copies / Zoom(+) key to shift the number
of copies to be made from “99” to “1”. Make sure the desired
number of copies to be made is shown on the copy
quantity/magnification display. The setting can be made to
any number up to “99”.
NOTE
It is possible for you to limit the number of copies or copy
sets that can be made at one time.
7 Setting an original
Open the original cover and set the original that you want
to copy face-down onto the platen. Be sure to align the
original flush up against the left rear corner of the platen.
NOTES
• If the optional Document Processor is installed on your
copier, set the original(s) in the Document Processor.
• Shadows may appear around the edges and up the
middle of copies made from open-faced originals (such
as books, etc.).
• When the copier is in a copy-ready state, the optical
lamp will be lit. This does NOT indicate trouble with
the copier.
8 Start copying
Press the Start key. Copying will begin immediately once
the Start indicator is lit green.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera km 1500 laser 15ppm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera km 1500 laser 15ppm in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info