522405

KVH TracVision M7 Manual

24
Zoom out
Zoom in
Previous page
1/38
Next page
23
Follow these steps and refer to the flowchart in
Figure 38 to set up the system for a custom pair
of satellites from the antenna’s library.
a. At “Set up satellite(s),” press the YES button
on the MCP’s front panel.
b. At “Circular or Linear,” press LIN.
c. At “Trisat Mode?,” press NO.
d. At “Install A <SAT NAME>,” press NEXT
until the display shows the first (primary)
satellite you want to select. Then press YES.
(See Appendix B on page 32 for a list of
available satellites.)
NOTE: If you don’t find the satellite you want, you
can set up user-defined satellites. Refer to the
associated Application Note on the KVH Partner
Portal (KVH-authorized technicians only).
e. Repeat Step d to select the second satellite. If
you want to set up the antenna to track just
one satellite, select “None” instead.
f. At “Set Sat Switch Type,” press AUTO for
automatic satellite switching (recommended)
or MANUAL for manual switching.
g. At “Set Lat/Long?,” press YES.
TIP: You can determine approximate latitude and
longitude in Europe from the position grids provided
in Appendix C on page 33.
h. At “Latitude,” use the - and + buttons to set
each digit of the vessel’s latitude. Press Enter
to accept each digit.
i. At “Longitude,” set the vessel’s longitude.
j. After the antenna restarts, at “Skew Angle,”
note the reported skew angle for future
reference. Then press OK. You will set the
LNB to this skew angle later.
k. Set up the receiver(s) for the same satellites,
and in the same order, that you set them up
in the antenna:
Antenna Receiver DiSEqC
Sat. A Alternative 1 or A DiSEqC 1
Sat. B Alternative 2 or B DiSEqC 2
Trisat mode?
Yes No Cancel
Install A <SAT NAME>
Yes Next Cancel
Press NEXT until
desired satellite
displays; then
press YES
Install B <SAT NAME>
Yes Next Cancel
Set up satellite(s)?
Yes No
Circular or Linear?
Cir Lin Cancel
Longitude: ###E
- Enter +
Set Lat/Long?
Yes Next Cancel
Latitude: ##N
- Enter +
Use +/- to set
vessel latitude
Use +/- to set
vessel longitude
<SAT A> and
<SAT B> installed
Restarting antenna
Latitude: ##N
Longitude: ###E
Set Sat Switch Type
Auto Manual Cancel
Skew Angle ##.#
OK
Note skew angle
for later use
Figure 38: Custom Pair Satellite Selection Menus on MCP
Select Satellites
15
Linear Systems - Custom Pair
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KVH TracVision M7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KVH TracVision M7 in the language / languages: English as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KVH TracVision M7

KVH TracVision M7 User Manual - English - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info