621044
8
Zoom out
Zoom in
Previous page
1/30
Next page
33
EN
Basic settings
Water Hardness setting
The appliance features a system that automatically indicates when it is time to descale.
The system can be optimised for households with very soft
water (also through using a water softening appliance) and
very hard water, by changing the user settings to the relevant
range of water hardness (see table below).
To set the water hardness parameter, proceed as follows:
1. In standby mode press the Descaling key (about 3
seconds) The water hardness begins to flash (not
necessary after connecting the device to the network, or
after a power failure).
2. Turn the +/- Selection knob to set the correct water
hardness parameter value, according to the below table.
3. Press the OK key to set the parameter (or wait until the
parameter is set by time-out). The clock is displayed.
Type
Water hardness
Display
Ca + Mg
(ppm)
English deg. [°eH]
French deg.
[°dF]
German deg.
[°dH]
Soft water
0 to 150
0 to 11
0 to 15
0 to 8
SOFT
Medium water
151 to 350
12 to 25
16 to 35
9 to 20
MED
Hard water
501 to 500
26 to 35
36 to 50
21 to 28
HARD
Safety blocking
The oven functioning can be blocked (for example, to stop it being used by children).
00:00
1,2
1. To block the oven, press the Safetyblock key for 3
seconds. You will hear a sound signal and the display will
show the word SAFE”. The oven is blocked in this state
and cannot be used.
2. To unblock the oven, press the Safetyblock key again for
3 seconds. You will hear a sound signal and the display
will show the clock again.
The clock can be seen by pressing briefly the Start/Stop
key.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EDG6260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EDG6260 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EDG6260

Kuppersbusch EDG6260 User Manual - German - 31 pages

Kuppersbusch EDG6260 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info