The gas detection system must be documented in the dispensing log.
This is done using the "Dispensing log sheet" form which is included in the basic package. The form must be completed together with the operator.
By signing this, the operator confirms the functionality of the gas detection system and their complete understanding of the system.
An additional maintenance plate will also be glued to the dispensing log sheet.
The sensor unit must be exchanged after
four years!
If the exchange date as shown here is
not adhered to, system malfunctions
may occur.
I.
II.
III.
IV.
next exchange!
2020
2021
2022
2023
Recurrent tests and functional checks (of the pre-/main alarm, faults) should also be entered into the dispensing log sheet, together with the date of the test.
For the CO2 CONTROL AM / AM PLUS versions, see the additional notes in the CO2 CONTROL AM / AM PLUS installation sheet.
4Maintenance / servicing
4.1General remarks
Safety devices on monitoring equipment must be maintained regularly at the intervals specified by the manufacturer.
The maintenance of the equipment can for example be performed in accordance with BGR 228 by the installation company. The system is maintenance-free
except for the sensor unit. The sensor unit must be replaced by the installer with a replacement unit after 4 years of operation.
4.2Replacing the CO2 sensor unit
The removal of a sensor unit without connecting a replacement unit is prohibited!
The installer can request replacement units directly from our plant.
A replacement unit must be available before replacing any sensor unit. The seamless operation of the gas detection unit must be ensured.
After swapping the units, pack the old sensor unit in the packaging of the replacement unit and send this back to our plant. After replacing any system
component, the system must be re-initialised!
Important note:
After replacing, the new maintenance plate indicating the replacement date must be applied to the sensor unit, and entered in the dispensing log sheet.
The sensor unit must be exchanged after
four years!
If the exchange date as shown here is
not adhered to, system malfunctions
may occur.
I.
II.
III.
IV.
next exchange!
2020
2021
2022
2023
4.3Cleaning
Cleaning of the unit is not planned for, nor is this permitted.
4.4Functional check
A functional check (minimum requirement for the monitoring of detection devices in accordance with BGR 228) of the CO2 CONTROL is not required, and not
necessary due to any maintenance replacement. Where desired, the system can be tested using CO
2
at any time, and the alarm function checked. No test gas is
necessary for this! Since an on-site functional check does not provide sufficient testing of the threshold value tolerances (lack of temperature and pressure
constants), this can only be performed at our plant in accordance with the prescribed test guidelines.
For the CO2 CONTROL AM / AM PLUS versions, see the additional notes in the CO2 CONTROL AM / AM PLUS installation sheet.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kundo xT CO2 Control at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kundo xT CO2 Control in the language / languages: English as an attachment in your email.
The manual is 1,55 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
