639466

Kubota B2100 Manual

22
Zoom out
Zoom in
Previous page
1/233
Next page
B1700·B2100·B2400 WSM,11770 6
FRONT
AXLE
Turning
Force
of
Spiral Bevel Pinion Shaft
1.
Install the spiral bevel pinion shaft assembly
to
the
front
axle
case.
2.
Wind a string around the spiral bevel pinion shaft and attach
spring balance
to
the
tip
ofthe
string.
3.
Slowly pull the spring balance in a direction
at
right
angle
to
the spiral bevel pinion shaft
to
measure
the
turning
force.
4.
If
the turning force
is
not
within
the factory specifications,
adjust
with
the lock nut.
127.5to
166.7 N
Turning force
Factory:>pec.
13
to
17
kgf
28.7
to
37.51bs
•
NOTE
..
The
turning
torque
is
figured
by
multiplying
the
radius
(distance from the center
of
the spiral bevel pinion shaft
to
a
point on the circumference from which the string
is
pulled)
by the reading on the spring balance.
•
After
turning force adjustment,
be
sure
to
stake
the
lock nut.
Backlash between Spiral Bevel Pinion Shaft and Spiral Bevel
Gear
1.
Set
a dial gauge (lever type)
with
its finger on
the
spline
of
spiral bevel pinion shaft.
2.
Measure the backlash
by
moving the spiral bevel pinion shaft
by
hand lightly.
3.
If
the
backlash
is
not
within
the
factory
specifications,
change the adjusting collars
(3),
(4).
For
example change
the
adjusting collar
(4)
to
0.1
mm
(0.004 in.) smaller size, and
change the adjusting collar
(3)
to
0.1
mm
(0.004 in.) larger
size.
4.
Adjust
the
backlash
properly
by
repeating
the
above
procedu
res.
Backlash between
s~iral
bevel pinion
Factory
spec.
0.1
toO.3 mm
s
aft
and spiral bevel
0.004toO.012 in.
gear
(Reference)
.. Above factory specification should
be
measured on
the
tooth
of
spiral bevel pinion. When measuring
the
backlash on
the
spline
of
its shaft, factory specification
will
be
0.0571
to
0.1714
mm
(0.00225
to
0.00675 in.).
.. Thickness
of
adjusting collars
(3),
(4)
:
3.4mm(0.134in.)
4.1
mm(0.161 in.)
3.6
mm
(0.142 in.)
4.2
mm
(0.165 in.)
3.8
mm
(0.150 in.) 4.4
mm
(0.173 in.)
4.0
mm
(0.157 in.)
4.6
mm
(0.181
in.)
B177F608
(1)
Spiral Bevel Gear
(2)
Spiral Bevel Pinion Shaft
(3)
Adjusting Collar
(4)
Adjusting Collar
6-S
11
… 22 …


Need help? Post your question in this forum.

Forumrules
1

Forum

kubota-b2100

Reset search

  • My b2100 (1999) brake s work fine, but the handle to lock them doesn't work any longer. Feels like something is disconnected. Anyone have and answer or a schematic? Submitted on 23-11-2021 at 05:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota B2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2100 in the language / languages: English as an attachment in your email.

The manual is 15,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kubota B2100

Kubota B2100 Installation Guide - English - 233 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info