639466
210
Zoom out
Zoom in
Previous page
1/233
Next page
3
TRANSMISSION
B177P126
(2)
Manual
Transmission Type
D007F029
B177P127
B1700·B21 00·B2400 WSM, 11770
Clearance between 13T Gear and 3rd Shaft
1.
Measure the
13T
gear 1.0.
with
an
inside micrometer, and
then 3rd shaft
0.0.
with
an outside micrometer.
2.
Measure the
0.0.
of
two
needles in
the
needle bearing
with
an
outside micrometer.
3.
Clearance
is
the difference between
the
gear 1.0. and
the
sum
of
shaft
0.0.
and
two
needle
0.0
..
4.
If
the clearance exceeds the allowable
limit,
replace.
Factory spec.
0.007
to
0.046 mm
Clearance between
0.0003
to
0.0018 in.
13T gear and 3rd
shaft
Allowable
limit
0.10mm
0.0039 in.
3rd shaft O.D. Factory spec.
21.987
to
22.000 mm
0.8656toO.8661 in.
13T gear
I.D.
Factory
spec.
28.007
to
28.021 mm
1.1026to
1.1032 in.
NeedleO.D.
Factory spec.
2.994to
3.000 mm
0.1179toO.1181 in.
Bearing Check
1.
While holding the inner race, push and pull the
outer
race
in
all directions
to
check
for
wear and roughness.
2.
Apply transmission oil
to
the bearing and hold
the
inner race.
3.
For
needle bearing, lay the needle rollers
to
check
for
any
damage and wear.
4.
Replace
it if
defects are found.
Clearance between Shift Fork and Shift Gear Groove
1.
Insert the
fork
into
the shift gear groove and measure
the
clearance
with
a feeler gauge.
2.
Ifthe
clearance exceeds the allowable
limit,
replace it.
Factory
spec.
0.10toO.35
mm
Clearance between
0.004toO.014in.
shift
fork
and shift
gear groove
Allowable
limit
0.5 mm
0.020 in.
3-S40
210


Need help? Post your question in this forum.

Forumrules
1

Forum

kubota-b2100

Reset search

  • My b2100 (1999) brake s work fine, but the handle to lock them doesn't work any longer. Feels like something is disconnected. Anyone have and answer or a schematic? Submitted on 23-11-2021 at 05:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota B2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2100 in the language / languages: English as an attachment in your email.

The manual is 15,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kubota B2100

Kubota B2100 Installation Guide - English - 233 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info