639466
209
Zoom out
Zoom in
Previous page
1/233
Next page
81700·82100·82400
WSM,11770
3
TRANSMISSION
Pump Shaft
1.
Check
the
seal
surface (1), the bearing surface
(2)
and
the
bearing (4).
2.
Ifthe
shaft
is
rough
or
groove, replace.
3.
Ifthe
bearing
is
worn,
replace.
Needle Bearing and Oil
Seal
1.
Check
the oil
seals
(1)
for
damage.
2.
Check
the needle beari
ngs
(2)
for
wear.
3.
Ifthe
oil
seals
and bearings are
worn,
replace them.
Charge Relief Valve
1.
Check
the charge relief cone
(3)
and
the
seat in
the
housing
for
damage.
2.
If
defects are found, replace them.
8177P107
8177P109
(1)
Seal
Surface
(2) 8earing Surface
(1) Oil
Seal
(1) Plug
(2) Spring
(3)
Pump Shaft
(4) 8earing
(2)
Needle 8earing
(3) Charge Relief Cone
D007F029
8177P127
Bearing Check
1.
While holding the inner race, push and pull the
outer
race in
all directions
to
check
for
wear and roughness.
2.
Apply transmission oil
to
the bearing and hold
the
inner race.
3.
For
needle bearing, lay the needle rollers
to
check
for
any
damage and wear.
4.
Replace
it if
defects are found.
Clearance between Shift Fork and Shift Gear Groove
1.
Insert the
fork
into
the
shift
gear groove and measure the
clearance
with
a feeler gauge.
2.
Ifthe
clearance exceeds the allowable
limit,
replace it.
Factory spec.
0.10toO.35
mm
Clearance
between
0.004to
0.014 in.
shift
fork
and
shift
gear groove
Allowable
limit
0.5mm
0.020 in.
3-S39
209


Need help? Post your question in this forum.

Forumrules
1

Forum

kubota-b2100

Reset search

  • My b2100 (1999) brake s work fine, but the handle to lock them doesn't work any longer. Feels like something is disconnected. Anyone have and answer or a schematic? Submitted on 23-11-2021 at 05:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota B2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota B2100 in the language / languages: English as an attachment in your email.

The manual is 15,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kubota B2100

Kubota B2100 Installation Guide - English - 233 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info