657919
60
Zoom out
Zoom in
Previous page
1/152
Next page
12 SERVICE WORK ON THE CHASSIS 58
V00361-10
Mount and tighten screw
.
Guideline
Screw, top steering stem M8 17 Nm
(12.5 lbf ft)
Loctite
®
243™
E00375-12
Position the brake caliper, and mount and tighten screws
.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft)
Loctite
®
243™
Mount the cable tie(s).
Position the brake line, wiring harness, and clamp. Mount and tighten screws

.
Finishing work
Install the front fender. ( p. 60)
Mount the handlebar cushion.
Install the headlight mask with the headlight. ( p. 95)
Check the headlight setting. ( p. 97)
Install the front wheel. ( p. 85)
Check that the wiring harness, throttle cables, and brake and clutch lines can move
freely and are routed correctly.
Check the play of the steering head bearing. ( p. 58)
Remove the motorcycle from the lift stand. ( p. 51)
12.13 Checking the play of the steering head bearing
Warning
Danger of accidentsIncorrect steering head bearing play impairs the handling characteristic and damages components.
Correct incorrect steering head bearing play immediately. (Your authorized KTM workshop will be glad to help.)
Info
If the vehicle is operated for a lengthy period with play in the steering head bearing, the bearings and the bearing seats in the
frame can become damaged over time.
Preparatory work
Raise the motorcycle with a lift stand. ( p. 51)
H01167-01
Main work
Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
Play should not be detectable on the steering head bearing.
» If there is detectable play:
Adjust the steering head bearing play. ( p. 59)
Move the handlebar to and fro over the entire steering range.
It must be possible to move the handlebar easily over the entire steering range.
There should be no detectable detent positions.
» If detent positions are detected:
Adjust the steering head bearing play. ( p. 59)
Check the steering head bearing and change if necessary.
Finishing work
Remove the motorcycle from the lift stand. ( p. 51)
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 250 EXC - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 250 EXC - 2017 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info