657919
57
Zoom out
Zoom in
Previous page
1/152
Next page
12 SERVICE WORK ON THE CHASSIS 55
V00357-10
Main work
Remove screw
. Remove screw
. Pull off the upper triple clamp with the han-
dlebar and hang it to one side.
Info
Protect the components against damage by covering them.
Do not bend the cables and lines.
V00358-10
Remove O-ring
. Remove protective ring
.
Take off the lower triple clamp with the steering stem.
Remove the upper steering head bearing.
12.11 Installing the lower triple clamp (All standard EXC/XC-W models)
V00359-10
Main work
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 143)
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Check whether upper steering head seal
is correctly positioned.
Mount protective ring
and O-ring
.
V00336-11
Position the upper triple clamp with the handlebar.
Position the clutch line and wiring harness.
Mount screw
but do not tighten yet.
H01637-10
Position the fork legs.
Bleeder screws
are positioned toward the front.
Info
The rebound damping is located in right fork leg REB (red adjusting screw).
The compression damping is located in left fork leg COMP (white adjusting
screw).
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KTM 250 EXC - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KTM 250 EXC - 2017 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info