693399
16
Zoom out
Zoom in
Previous page
1/58
Next page
rev. 0/2018
lares 4.0 PROGRAMMING MANUAL
16
NTP
• Enabled: enable or disable the connection to the NTP server (Network Time Protocol).
Keep the system clock up to date automatically. If required, you will be able to modify the parameters by enabling this
option.
Option enabled
Option disabled
1) Server name: this is the server used by the control panel to synchronise the time.
2) Port: the port on which data relative to the NTP protocol is transmitted
3) Monitoring period: this is the period of time which elapses between one communication and another from the control
panel with the NTP server
4) Retentiv period in the event of an error: this is the lapse in time between one communications and another in the
event of an error
N.B. We would not recommend that you change these parameters unless it is absolutely necessary.
SMTP
• This enables the SMTP server to be configured which allows the control panel to send e-mails
Option enabled
Option disabled
The parameters which are required to be set for sending e-mails are listed below. (Those which appear by default are
not valid!)
The new lares 4.0 platform can also manage e-mail addresses which use SSL or TLS protocols (e.g. Gmail)
Otherwise you can create a host at www.kseniadns.com and use the same settings.
• Sender: The sender’s name must be programmed in this section (example: Central Alarm System). Some servers
however may require a valid e-mail address to be entered (e.g. for servers which do not require authentication).
For example, the sender will be as follows if you use the “Kseniadns” server settings: (xxxxxx@kseniadns.com)
• Protocol: a choice between SSL, TLS or none. Please refer to the parameters of the server being used. (SSL if using
kseniadns).
• Port: the security protocol communication port. Please refer to the parameters of the server being used. (465 if using
kseniadns)
• Username: the user used for the SMTP service.
The name of the user for “Kseniadns” server settings which have been created to name the system (e.g.: the username
will be mariorossi if the host name is mariorossi.kseniadns.com)
• Password: the password used for the SMTP service. The password chosen when creating the host (default 123456) for
“Kseniadns” server settings
16


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info