693399
13
Zoom out
Zoom in
Previous page
1/58
Next page
lares 4.0 PROGRAMMING MANUAL
13
rev. 0/2018
Options
We find the following sub-menus in this section: General, network, GSM-PSTN communicator.
From this moment on, you will be able to modify the various lares 4.0 parameters.
System language
Select the menu language. You will able to choose the language according to your country.
Wireless
• On-board receiver: to enable or disable the on-board wireless receiver. (not available on lares 4.0 - 16 and lares 4.0 - 40
which require the DUO transceiver).
• Jamming threshold (dBm): a noise power threshold on the radio channel beyond which a tamper attempt has been
signalled.
Arming mode
In this section you will be able to select how entries are managed and potentially to prevent them in the event of a fault.
Alarm and fault signals are also managed.
• Tamper cycle time: the time (expressed in minutes) which determines the maximum duration of the tamper cycle.
• Throw alarms each zone cycle: the ‘Zone alarm’ event and any associated actions are generated (e.g. SMS, phone
calls...) whenever a zone is violated by selecting this option. The corresponding actions are only completed the first
time by selecting this option if the zone event has been repeated several times throughout the same alarm cycle.
• Bypass also zone tamper: no tampering reports will be generated when a zone has been excluded if it has been
tampered with and if this option has been enabled. Any tampering will not be recorded in the event log and it will not
be displayed on either the keypad or the web server.
• Allow system arm on fault condition: the control panel default does NOT allow any entries in the system in the event
of a fault and/or a tamper.
You will be able to enter the partitions in the presence of any faults in progress by selecting this option.
• Delete alarm memories for each entry: the alarm memories will be deleted whenever an arming is made, i.e. they will
no longer be displayed on the keypads.
• Clear Tamper memory with user code: you will be able to use the user code to delete the tamper memories displayed
on the keypad (Main menu/Alarm reset).
• Manage missing peripheral as fault: the respective fault event instead of a tamper event will be generated if a BUS or
a wireless device no longer communicates with the control panel because it is faulty or has been disconnected.
System
• Change the time: it is not possible to modify these parameters due to the current status.
• Date format: it is not possible to modify these parameters due to the current status.
• Time format: it is not possible to modify these parameters due to the current status.
General
13


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info