693399
5
Zoom out
Zoom in
Previous page
1/58
Next page
lares 4.0 PROGRAMMING MANUAL
5
rev. 0/2018
• Updated: in this field it is possible to start/run the control panel update by uploading the file found on the SD card and
which has been downloaded previously from the respective area of the www.kseniasecurity.com website
• Back-up program.:
- Create new: backs-up any programming by saving the file on an SD card.
- Restoring: Any programming data saved previously will be read from the SD card and loaded into the control panel.
• Networking: a network configuration menu which allows the network parameters to be read/modified.
- IP address: The control panel IP address
- Subnet mask: Subnet mask.
- Gateway: Gateway IP address.
- DHCP server: This menu item is activated to allow the DHCP to be re-enabled if the control panel has been set to a
fixed IP address.
• Language: you can select the keypad language via this menu.
• Vers. Control panel: this allows you to view the control panel firmware version (although not the web server)
PROGRAMMING IN “PEER TO PEER” MODE (PROGRAMMABLE VIA PC)
All configurations in general terms can be set freely using any of the methods described in (page 3) with the exception of
using the keypad and generating voice messages:
the final function can only be used with a Loquendo USB stick (the one which is used for lares/basis) or by activating a
server licence on SecureWeb.
Please refer to the relevant section for generating voice messages via a local connection and a Loquendo USB stick.
The control panel has DHCP enabled as a default, therefore, there are two possibilities for finding out the IP address:
1) via the keypad, by using the dedicated menu inside the installer menu.
2) by using the server name https://KS-BOARD-xx-yy-zz (by replacing xx-yy-zz with the last six digits of the MAC
address which is printed on the control panel label).
The default address will be 192.168.2.97 in the event that the network to which the control panel is connected does not
support the DHCP.
N.B: The control panel only communicates by default in safe mode (https) via port 443.
Please type https://192.168.2.97 to access the control panel should the DHCP not be supported.
N.B: the default code for accessing configuration settings is 123456.
N.B: it is NOT possible to set a configuration if the system has been installed, even in part or if the user has disabled
access by using the installer code.
5


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info