Manual Krups xp 4000 (page 14 of 88) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

361592

Zoom out

Zoom in

1/88

If you do not achieve a good froth it is worth

experimenting with different brands of milk as

some milk brands will froth better than

others. UHT milk will always give a very good

froth.

• Turn the selector to the setting (16).

Once the appliance reaches the right

temperature, the orange temperature control

light will go out.

• Place a container under the steam nozzle

and turn the steam tap to max position.

• Let the water flow until steam appears, then

turn the tap back to position 0.

You can now start to prepare frothy milk.

• Hold the container under the cappuccino

accessory in such a way that the tip is

immersed in the milk.

• Turn the selector to the setting (17).

Keep the container straight during this

operation. Do not allow the tip of the

cappuccino accessory to touch the bottom

of the container because this could obstruct

the passage of the steam.

• Once the froth has been produced, turn the

selector to the

setting (16) for the

following cleaning operation in order to

prevent the milk from drying on the

cappuccino accessory:

• remove the container.

• place a container with water under the

cappuccino accessory.

• select the setting again (17) to remove

the milk residue.

• turn the selector to the O setting.

• clean the cappuccino accessory with a damp

cloth.

For more thorough cleaning of the

cappuccino accessory, please refer to the

paragraph on maintenance.

. Heating liquids

• Fill the water tank (1) (2) (3) and start the

appliance (4).

• Move the cappuccino accessory to the

exterior of the appliance.

• Turn the selector to the setting (16).

Once the appliance reaches the correct

temperature, the orange temperature control

light will go out.

• Immerse the cappuccino accessory in the

container holding the liquid to be heated.

• Then turn the selector to the setting (17)

until the liquid is hot enough, then reset the

selector to the O setting and remove the

container.

• For liquids other than water, turn the

selector to the setting

(16) for the

following cleaning operation in order to

prevent any blockage of the opening of the

cappuccino accessory :

• place a container with water below the

cappuccino accessory.

• select the setting again (17) to remove

the residue of the liquid.

• turn the selector to the setting O.

• Clean the cappuccino accessory with a damp

cloth.

• For more thorough cleaning of the

cappuccino accessory, please refer to the

paragraph on maintenance.

Maintenance

- Never wash your espresso machine

accessories in the dishwasher.

After use, the water tank must be emptied.

. Drip tray

This must be emptied after using the

appliance after taking off the grid (19). If

several espressos are being prepared one after

the other, the drip tray should be emptied

from time to time (about once every 7 - 8

espressos). The presence of water is normal

and does not signify a leak. If necessary, clean

the drip tray and its grid with water and a

little non-abrasive washing-up liquid, rinse

and dry. When reassembling the machine,

ensure that the plastic lining is in the right

place (20).

XP 4000/4020 eur Lta. PM6.5 30/11/04, 15:5317

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups xp 4000 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups xp 4000

Krups xp 4000 User Manual - English - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups xp 4000 Manual

Product: