690400
21
Zoom out
Zoom in
Previous page
1/170
Next page
Min 5 sec
> 6 sec
EN
FR
21
Restauration des réglages par défaut
Vidange du système avant une période de non-utilisation ou en protection contre le gel
Les réglages par défaut sont les suivants:
- Boutons Lungo (110ml), Espresso (40ml) et Ristretto (25 ml).
- Mode de mise hors tension automatique après 9 min de
non-utilisation.
- Par défaut, le niveau de dureté de l'eau est défini sur 4
(eau dure).
Pour restaurer les réglages par défaut à partir de votre machine:
1. Vérifiez que la machine est éteinte.
2. Appuyez simultanément sur les boutons Espresso et Lungo
pendant au moins 5 secondes.
Tous les boutons et LEDs s'allumeront une fois pour confirmer
le changement.
Si vous réinitialisez les
paramètres d'usine, le couplage
et la gestion du stock de capsules
seront annulés.
Retirez le réservoir
d’eau. Placez un récipient
sous la sortie café.
Remarques: vous devez peut-être laisser passer 10minutes avant que votre machine puisse brasser à nouveau.
Vérifiez que la machine
est sous tension,
appuyez simultanément
sur les boutons Ristretto
et Lungo pendant au
moins 6secondes.
Les boutons Ristretto et Lungo clignotent pour confirmation.
Refermez ensuite la fenêtre coulissante pour commencer la
procédure. Si la fenêtre coulissante était déjà fermée, le processus
de vidange démarre automatiquement. À la fin de la procédure,
nettoyez le bac d’égouttage et le support de tasse. La machine
passe automatiquement en mode de mise hors tension une fois la
vidange terminée.
Reset to Factory Settings /
Emptying the System
before a period of non-use or for frost protection /
Factory settings are:
- Lungo, Espresso, Ristretto coffee buttons 110ml,
40ml, 25ml.
- Automatic OFF mode after 9 minutes.
- The water hardness set by default is hard, level 4.
To do it via your machine:
1. Ensure the machine is turned OFF.
2. Press and hold Espresso & Lungo buttons for at
least 5 seconds.
All the coffee buttons and LEDs will blink once as
confirmation.
If you reset to factory settings,
this will cancel the pairing and the
capsule stock management.
Remove the water tank.
Place a container under
the coffee outlet.
To note, the machine remains blocked for 10 minutes after emptying!
Ensure the machine
is ON, press and hold
the Ristretto & Lungo
buttons together for at
least 6 seconds.
The Ristretto and Lungo coffee buttons will
flash for confirmation. Then close the slider to start
procedure. If the slider was already closed, the
emptying process starts automatically. When the
procedure is finished, clean the drip tray and the cup
support. Machine turns to OFF mode automatically
when empty.
UM_NESPRESSO_PRODIGIO_MILK_KRUPS.indb 21 05.12.16 16:49
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups XN411T Prodigio and Milk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups XN411T Prodigio and Milk in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info