565308
9
Zoom out
Zoom in
Previous page
1/15
Next page
16 17
•Turn the steam/hot water selector to the
position (21).
Hold the jug while the froth is produced and
make sure the nozzle does not touch the
bottom of the container so as not to prevent
the passage of the steam.
Once the froth has been obtained, reset the
steam/hot water selector to the position
and remove the jug. Add the milk and the
milk froth to the coffee.
Clean the frothing aid and the steam nozzle using a damp cloth immediately
after frothing milk.
•To remove any remaining trace of milk from the steam nozzle, place a container
under the nozzle and turn the steam/hot water selector to the position for a
few seconds.
3. Heating liquids
• Remove the frothing aid.
• Press the steam preselection button
(22).
The «steam» indicator light starts to flash.
When preheating is finished, the «steam»
indicator light will stay on and you can now
start to produce steam.
Hold the container containing the liquid under
the steam nozzle and immerse the nozzle in
the liquid.Turn the steam/hot water selector
to position (23).
When the liquid is hot enough, reset the
selector to the position and remove
the container.
Clean the steam nozzle using a damp cloth
immediately after heating any liquid.
To remove any remaining trace of liquid from
the steam nozzle, place a container under the
nozzle and turn the steam/hot water selector
to the position for a few seconds.
4. Cancelling the steam function and returning to the preparation of
an espresso coffee or hot water.
You can cancel the steam production function in two ways:
After the appliance has produced the steam, turn the steam/hot water selector
to the position .After about ten minutes, the steam production function is
deactivated and the «on/off» and «steam» indicator lights will flash as the
appliance cools down.Then run water through the heating system - See P17.
Or
Should you wish to prepare an espresso coffee immediately after the appliance
has been producing steam:
•Turn the steam/hot water selector to the position and cancel the preselection
of steam by pressing the steam preselection button .
The «on/off» and «steam» indicator lights flash
Do not wait for the appliance to cool down naturally, run some water through the
heating system:-
Running water through the heating system
Place a container under the steam nozzle.
•Turn the steam/hot water selector to the position .
First steam then hot water will come out of the steam nozzle.
The flow of water will stop automatically after a few seconds.
Return the steam/hot water selector to the position .
The indicator lights «on/off», «rinse», «1 normal cup», «1 full-flavoured
cup», «2 normal cups» and «ground coffee» will come on.You can now
prepare an espresso coffee in the usual way.
Preparation of hot water
This appliance can be used to produce hot water for making instant drinks, tea etc.
Place a cup under the steam nozzle and turn the steam/hot water selector to
the position .
Once the cup contains enough hot water, reset the selector to the position .
Emptying the coffee collector and the tank
The coffee collector collects the used ground
coffee and the tray collects any remaining water.
If the indicator light «empty collector»
comes on, slightly lift the tray and remove it
(24).
Empty and clean the coffee collector and
the tray, wait 10 seconds before replacing.
The indicator light «empty collector»
flashes if the tray is not pressed home or
is incorrectly installed.
KRUPS KRUPS
Indicator LightsIndicator Lights
21
22
23
24
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups ORCHESTRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups ORCHESTRO in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info