565308

Krups ORCHESTRO Manual

7
Zoom out
Zoom in
Previous page
1/15
Next page
12 13
3. Rinsing the circuit
Rinsing is required when you first use the
appliance, e
very time the appliance is
s
witched on
, if the temperature is too low or
if the correct operating temperature has not
been reached.
• If necessary, turn on the appliance by pressing
the control for 1 second.The «on/off»
indicator light flashes while the appliance
is heating.
Once the operating temperature has been reached, the indicator lights «on/off»
and «rinse» come on.
• Place a container beneath the coffee outlets then press the control (11).
Rinsing stops automatically after two or three seconds.
Preparation of an espresso coffee
You have now set up your appliance.At the end of rinsing the following indicator
lights come on: «rinse», «1 normal cup», «1 full-flavoured cup»,
«2 normal cups» and «ground coffee».
Setting the quantity per cup
You can adjust the quantity of espresso coffee
per cup using the “cup full” adjustment dial
(12).
Setting = normal espresso
Setting = large espresso
Turn the dial to the desired position before
preparing an espresso.
Note! The dial can be used to adjust the quantity during the preparation
of the espresso coffee (see page 14 – point 3).
1. Using coffee beans
Filling the compartment with coffee beans
• Open the lid.
• Put the coffee beans into the compartment
(not more than 250g) (13).
Warning! Never use frozen coffee beans.
Warning! Make sure that no foreign matter, such as the tiny stones
mixed in with the coffee beans, gets into the compartment.
Any damage due to foreign bodies having entered the coffee
bean compartment is excluded from the guarantee.
• Reclose the lid.
You can now start:
• Place one or two cups under the coffee
outlets.You can raise or lower the outlets
according to the size of your cups (14).
• Press the control selected or or
(14).
Note! It is not possible to make two
cups of full-flavoured coffee
at once.
The mill will grind the necessary quantity of
ground coffee.
All appliances are set at the factory to an
average setting.
You can adjust the degree of fineness of
grinding desired (15) using the adjustment dial
situated inside the coffee bean compartment.
• Clockwise = coarser ground coffee
• Anticlockwise = finer ground coffee
A fine setting is preferable for lightly roasted
beans and a coarse setting for dark roasted
beans.
Note! The setting can only be altered during grinding.
Note! To obtain the best result, a stop time is marked in the flow
of the coffee.
2. Using ground coffee
• Open the lid of the ground coffee channel
and pour in not more than one or two
measure of ground coffee using the
measuring spoon (16).
1 measure = 1 cup
2 measures = 2 cups
KRUPS KRUPS
Indicator LightsIndicator Lights
11
12
13
14
15
16
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups ORCHESTRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups ORCHESTRO in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info