22
■ Turn the selector knob for steam/hot water to
the position (32).
The de-scaling solution will be pumped
intermittently through the steam nozzle.
When the steam system is de-scaled, the
“empty spent coffee holder” indicator will glow.
■ Take out and empty the drawer with the spent
coffee holder. Then replace these parts.
The “ON/OFF” and “steam” indicators will
blink.
■ Turn the selector knob for steam/hot water to the position.
The de-scaling process will now continue and the de-scaling solution will
run intermittently into the drawer.
■ When the “fill water tank” and “empty spent coffee holder” glow, rinse
out the water tank thoroughly. Fill the tank with fresh water (at least 1 litre -
a good half tankful) and return it to the appliance.
■ Remove the drawer, empty it and return it to the appliance.
The “ON/OFF” and “steam” indicators will blink.
■ Place a sufficiently large receptacle (at least 300 ml capacity) below the
steam nozzle (32).
■ Turn the selector knob for steam/hot water to the position (32).
The water will be pumped intermittently through the steam nozzle.
■ When the “empty spent coffee holder” indicator glows, take out and
empty the drawer with the spent coffee holder. Then replace these parts.
The “ON/OFF” and “steam” indicators will blink.
■ Turn the selector knob for steam/hot water to the position. The rinsing
procedure will continue and the water will run intermittently into the
drawer.
■ When the rinsing operation is completed, the “empty spent coffee holder”
indicator will glow. Empty the drawer and replace it.
The “ON/OFF” and “rinse” indicators will glow.
■ Place a receptacle beneath the espresso delivery pipe and press the key.
After the rinsing operation, all indicators will be extinguished.
■ Remove the drawer with the base grid and spent coffee holder. Clean these
parts with warm water and washing-up liquid. Then dry them thoroughly
and return them to the appliance.
The lime-scale removal programme takes about 25 minutes to complete.
appliance
indicator(s)
32
