4407
14
Zoom out
Zoom in
Previous page
1/33
Next page
14
Never clean the motor unit under running
water or dip it into water - just wipe it
down gently with a moist cloth.
Instructions for Use
Mixing beaker
Lay the silicon seal on the stainless steel
surface in the beaker plinth (1).
Place the mixing beaker on the plinth and
secure it firmly with a 1/4 turn (2, 3).
For easy assembly of the mixing beaker on
the plinth, we recommend that you dampen
the silicon seal, in position inside the plinth,
with a wet sponge.
Make sure that the mixing beaker is
correctly screwed onto the plinth.
Place the motor unit on a level, dry and
clean working surface.
Then place the already assembled mixing
beaker onto it (4).
It is not necessary to press the beaker
downwards or to twist it, as it will
automatically locate itself correctly on the
rubber buffer of the drive mechanism.
Never place the beaker unit onto the
running appliance.
Note: For reasons of safety, the beaker
plinth will not locate on the appliance if the
mixing beaker has not already been
mounted on it.
Put all the ingredients into the mixing
beaker. For good, even results, put all the
liquids in first, switch on the appliance for
just a moment, and only then add the
solid ingredients.
Place the lid on the mixing beaker and
lock it into position. To make locking
easier, dampen the seal on the lid.Insert
the mains plug. The lid must remain on
the beaker as long as the appliance is in
operation. Switch on the appliance by
depressing the appropriate function key. It
is possible to change the function during
operation by simply depressing a
different function key, without switching
off the appliance.
To add further ingredients during the
mixing operation, just take the stopper out
of the lid and simply put them in.
To utilise the momentary function, first
press the “Vari Pulse” key. The control
light will start to blink and the desired
control function key should then be
pressed. The appliance will then run only
as long as the function key is pressed and
will stop as soon as it is released.
If this key is pressed several times
momentarily, the appliance will operate in
short intervals, thus making it easier to
judge the result achieved. To end the
momentary function, just press the “Vari
Pulse” key again and the control light will
be extinguished, indicating that the “Vari
Pulse” function is no longer in action.
To chop ice, put the ice cubes in the
mixing beaker and put on the lid. It is not
necessary to add any liquid. Utilise the ice
chopping function by pressing the AUTO
ICE key.
As soon as the required results have been
achieved, end the function either by
pressing the OFF key, or by pressing the
function key just used a further time. Then
pull out the mains plug.
DO NOT remove the mixing beaker from
the motor unit before the cutting knife has
come fully to rest.
575/576/577 GB 19/01/04 15:51 Page 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups FRESHMIX 6 PREMIUM F577 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups FRESHMIX 6 PREMIUM F577 in the language / languages: All languages as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups FRESHMIX 6 PREMIUM F577

Krups FRESHMIX 6 PREMIUM F577 User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info