361438

Krups fna 1 Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
12
• Your appliance is intended solely for
domestic and indoor use.
•Unplug your appliance as soon as you have
finished using it and when you clean it. Do
not unplug it by pulling on the cord.
•Do not use the appliance if it is not working
correctly, or if it has been damaged. If this
happens, please contact an approved KRUPS
service centre (see list in the service booklet).
•Any intervention other than normal cleaning
and maintenance by the customer must be
carried out by an approved KRUPS service
centre.
•Do not place the appliance, the power cord
or the plug in water or in any other liquid.
•Do not allow the cord to hang down within
reach of children.
•The power cord must not be close to or in
contact with the hot parts of your appliance,
close to a source of heat or resting on a
sharp edge.
•If the power cord or the plug are damaged,
do not use the appliance. To prevent any
risk, you must have these replaced by an
approved KRUPS service centre (see list in
the service booklet) .
•Do not place the appliance on a hot surface
such as a hotplate and never use it close to a
naked flame.
•For your own safety, please use only the
KRUPS accessories and spare parts which are
suitable for your appliance.
•Do not use the appliance when the drip tray
and the grille are not in place.
•All KRUPS appliances are subjected to strict
quality controls. Practical user tests are done
with appliances selected at random, which
explains any signs of use.
Before first use
It is recommended that you first rinse the
water heating system:
•Take the water tank (a) and fill it with cold
water (1).
•Replace the tank (a) by positioning it firmly
such that the connecting valve situated
beneath the tank opens.
• Plug in the appliance and set the switch (c)
to «I». The temperature indicator light (e)
flashes (green).
The capsule-holder head (f) must be closed
and empty.
• Place a fairly large container under the
coffee outlet.
Once the appliance reaches the correct
temperature, the temperature indicator light
(e) becomes fixed (green).
• Set the function selector (b) to the « »
position and allow half the tank to run
through.
• When the container is full, set the function
selector (b) to the central position and empty
the container.
• Then place the container under the steam/
hot water nozzle (g). Turn the nozzle
outwards if necessary.
• Set the function selector (b) to the « »
position and allow the other half of the tank
to run through.
• When the container is full, set the function
selector (b) to the central position and empty
the container.
• If necessary repeat the operation until the
tank has been completely emptied.
• Reset the switch (c) to «0».
Using the various functions of
your appliance
. THE ESPRESSO FUNCTION
• Fill the tank (a) with fresh water (1) and set
the switch (c) to «I». The temperature
indicator light (e) flashes (green).
• Raise the handle (f1) to open the capsule-
holder head (f) (2).
• Place a NESPRESSO capsule on the holder
(f3) (3) (flat side down) and lower the
handle (f1) (2).
• Place a cup under the coffee outlet.
Once the appliance reaches the correct
temperature, the temperature indicator light
(e) becomes fixed (green).
• Set the function selector (b) to the « »
position. The coffee starts to flow.
• You can stop the flow by returning the
function selector (b) to the central position.
FNA1.PM6.5 18/02/04, 9:3912
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups fna 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups fna 1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info