Manual Krups f 880 (page 18 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

361241

Zoom out

Zoom in

1/36

. FROTHING MILK FOR A CAPPUCCINO

When preparing an espresso, this machine

can be used to produce frothy milk to prepare

a cappuccino.

For best results, use the cappuccino accessory.

Please note: The cappuccino accessory

must only be used for producing frothy

milk.

•Fit the accessory to the end of the steam

nozzle (17).

•Pour about 200 ml of skimmed milk into a

small high-sided container (maximum

capacity 0.5 L) which will fit beneath the

steam nozzle.

The milk must be nice and fresh, and the

container must also be chilled, so do not rinse

it in hot water beforehand.

• Check that the boiler is full of water.

The pump switch must be in position

(18).

When the yellow temperature indicator light

goes out:

• Place a container under the steam nozzle

and turn the steam tap to max position.

•Let the water flow until steam appears, then

turn the tap back to position O.

You can now start to prepare frothy milk.

• Place a container under the steam nozzle in

such a way that it is completely immersed in

the milk.

• Turn the tap slowly to max position and

hold the container steady during the

operation (19).

The nozzle must not touch the bottom of the

container so as not to prevent the steam

escaping.

• Once you have obtained the froth, reset the

tap to position O and remove the container.

• Then set the tap to steam position again for

a few moments (with an empty container

under the nozzle) to eliminate the residue of

milk in the nozzle.

• Once this operation is finished, clean the

cappuccino accessory and the steam nozzle

with a damp cloth.

. HEATING OTHER LIQUIDS

• Take out the steam nozzle.

• Remove the cappuccino accessory.

• Make sure the boiler is full of water.

• Set the pump switch to position

• Switch on the appliance.

A little water and steam will escape from the

percolation head while the appliance is

heating up.

• When the yellow temperature indicator light

goes out, place a container under the steam

nozzle and turn the steam tap to max

position.

• Let the water flow until steam appears, then

turn the tap back to position O.

• Place the container under the steam nozzle

in such a way that the jet is immersed in the

liquid.

• Turn the tap slowly to max position.

• Once the liquid is hot enough, reset the tap

to position O and remove the container

from the nozzle.

Note :

If you wish to prepare an espresso

immediately after using steam, it is vital that

you allow the appliance to cool down to the

«coffee making» temperature :

• Place a container under the filter holder and

set the pump switch to the « » position.

• Let the water run through until the yellow

temperature indicator light goes out.

• Reset the pump switch to position

, after

which you may prepare an espresso in the

usual way.

Cleaning

• Before doing any cleaning, unplug the

appliance and allow it to cool down.

• Wipe the body of the appliance with a

damp cloth.

The water tank must be emptied after use.

• Remove the cup rest grid and clean it (20).

• Empty the drip tray and clean it.

ART. 880.PM6.5 19/01/04, 16:0118

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups f 880 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups f 880 Manual

Product: