672684

Krups EVIDENCE EA8908 Manual

29
Zoom out
Zoom in
Previous page
1/306
Next page
27
EN
Maintenance
All of these options allow you to run the selected programs. You should then follow the on-screen instructions.
Cleaning milk
Provides access to cleaning the machine’s one touch cappuccino block, which is essential
for ensuring good quality milk frothing.
Milk rinsing
Provides access to rinsing the machine’s one touch cappuccino block, which is essential for
ensuring good quality milk frothing.
Coffee rinsing
Provides access to rinsing the machine’s coffee circuit, which ensures the optimum taste
of coffee.
Coffee cleaning
Provides access to cleaning the machine’s coffee circuit (using a cleaning tablet), which
ensures the optimum taste of coffee.
Descaling
Provides access to descaling which is essential for the durability of your machine. When the
number of drinks is not high enough for descaling to be necessary, the function is not active.
Filter
Provides access to the lter mode, useful if the water is very hard, in order to ensure the best
taste and the health of your machine.
To quit the Cleaning menu, press or the Settings button.
Info
The “Info” menu provides access to information about your use and about certain stages in the life of your machine. It
also informs you about its upkeep. Below are the main details available.
Drinks prepared Displays the number of drinks prepared
Coffee circuit cleaning Indicates that is needs to be completed within x number of cycles.
Descaling Indicates that is needs to be completed within x number of cycles.
Filter Indicates that it will need to be changed in x days or x litres.
To quit the Info menu, press or the Settings button.
GENERAL MAINTENANCE
Emptying the coffee grounds collector and the drip tray
After a certain number of coffees, the machine will ask you to empty the coffee grounds collector and the drip tray. Not
to make correctly these operations can damage your machine.
The drip tray collects used water and the coffee grounds collector collects used ground coffee.
If the message “Please empty the two trays” is displayed, remove, empty and clean the drip collector tray. Remove,
empty and clean the coffee grounds collector (C). Fig. 19.
Replace the coffee grounds collector. Fig. 20
The drip tray is equipped with a oat to indicate when it needs emptying. However, the machine is also programmed to
ask for the drip collector tray to be emptied after a certain number of coffees, in addition to any intermediate emptying
operations that you may complete.
Rinsing the circuits:
You can start rinsing at any time by pressing and selecting Maintenance.
According to the type of recipe prepared, the machine may complete an automatic rinsing when it is turned off.
It is also possible to set an automatic rinse program when it is switched on (see “Settings” section p.22).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EVIDENCE EA8908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EVIDENCE EA8908 in the language / languages: All languages as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info