690182

Krups EA860E Manual

36
Zoom out
Zoom in
Previous page
1/184
Next page
CLEANING OF THE OTC (ONE TOUCH CAPPUCCINO) SYSTEM
MANUAL MAINTENANCE OF
THE OTC (ONE TOUCH CAPPUCCINO) SYSTEM
To perform this cleaning program, you will need a container (at least 0.6 L) and some KRUPS XS 4000 cleaning liquid
(26).
Turn the button of the cover of the OTC system to the Latte recipe position (17).
You may launch a cleaning program by going to the maintenance menu and then pressing OTC Cleaning. Follow the
instructions on the screen.
To disassemble the system, follow the instructions below:
Remove the exible hose from the opening of the pot and from the drinks spout (27).
Turn and remove the settings button of the cover (28) and run it under water (29). Then reposition it (30).
Lift the lever (31) and remove the cartridge (32).
Remove the black silicone body from the cartridge (33), and remove the plastic part (34) to run it under water (35).
Remove the air tip (36) and run it under water as you pinch its lips (37).
Run the entire silicone part under water (38).
Take the disassembly tool and unscrew the steam nozzle tip (39).
Use the pin (X) to clean the steam nozzle tip (40). Screw it back in.
Reposition all parts (41-42-43-44).
Remove the milk delivery hose from the cover of the pot (45), run it under water, and then reposition it.
Re-assemble the OTC system on the milk pot (46).
The manual cleaning of the OTC system is now performed.
Descaling Program - length: approximately 22 minutes
Warning! To meet the guarantee conditions, it is essential to perform the descaling cycle when the appliance
requests it. Carefully follow the instructions displayed on the screen. You may continue to use the appliance,
but it is advised to perform the cycle as soon as possible.
Only use KRUPS descaling products (F054) (25). You can obtain descaling products from KRUPS After-Sales Service
centres.
No liability shall be incurred in the case of damage to the appliance caused by the use of other products.
Make sure to perform the entire descaling program to prevent any risk of poisoning.
The descaling cycle is an intermittent cycle — do not place hands under the steam nozzle during the cycle.
Make sure to properly protect your counter top during the descaling cycles, particularly if it is made of marble, stone
or wood.
If your product is equipped with our Claris - Aqua Filter System F088 cartridge, please remove this cartridge before
starting the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. When a descaling is necessary, the
appliance advises you by periodically displaying a warning message.
To perform the descaling program, you will need a container that holds at least 0.6 L and a pouch of KRUPS descaling
agent.
When the message "Descaling required" is displayed, you may start the automatic descaling program by pressing OK.
Please follow the instructions displayed on the screen, making sure to dissolve the contents of the pouch.
The descaling cycle is comprised of 3 parts: the descaling phase itself, followed by 2 rinse phases.
If you unplug your machine during descaling or in the event of a power failure, the descaling program will
resume at the step underway during the incident. It will not be possible to defer this operation.
This is mandatory for reasons related to water circuit rinsing.
34
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA860E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA860E in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info