690182

Krups EA860E Manual

35
Zoom out
Zoom in
Previous page
1/184
Next page
EN
APPLIANCE MAINTENANCE
General Maintenance
Always remove the power cord from the electrical outlet and let the appliance cool before cleaning it. Don't use utensils
or products likely to scratch or corrode the appliance.
Wipe the outside of the appliance housing using a damp cloth.
Rinse the water tank with clean water.
These parts are not designed to be washed in a dishwasher.
Emptying the Coffee Grounds Tray, Coffee Drawer
(1)
and Drip Tray
First remove the OTC (One Touch Cappuccino) system (19).
If the message is displayed, remove, empty and clean the drip tray (20).
Remove, empty and clean the coffee grounds tray (21a).
Remove the coffee drawer
(1)
and wipe clean the area where the coffee drawer
(1)
sits (21b).
The drip tray is equipped with oats that indicate at any time when to empty it (22).
Once you remove the coffee grounds tray, you must empty it completely to prevent any subsequent overow.
Circuits Rinse
Coffee circuit rinse:
You may perform a rinse at any time by pressing "Coffee Rinse" .
OTC (One Touch Cappuccino) System Rinse
The machine will enable you to perform a rinse of the system after the preparation of your Latte recipes. This is possible
even if some milk remains in the container of the milk pot. It is important to perform this rinse after each Latte recipe
prepared. The milk pot must be in place as described in the PREPARING LATTE RECIPES paragraph.
Turn the button of the cover of the OTC system to the CLEAN position (23).
Go to the maintenance menu, press the OTC Rinse key. Simply follow the instructions on the screen in order to start
the rinse cycle. At the conclusion of this cycle, return the button of the OTC system to the Latte recipe position before
starting a new recipe.
IMPORTANT:
This rinse should be performed before returning the milk pot (if it still contains milk) to the refrigerator
upon completion of the last Latte recipe prepared. After each rinse, the various parts of the system
should be cleaned by running them under the water from the tap (see "Manual Maintenance of the OTC
System" paragraph).
Cleaning Program of the Coffee Circuit - total length: approximately 20 minutes
Warning! To meet the guarantee conditions, it is essential to perform the cleaning cycle when the appliance
requests it. Carefully follow the instructions displayed on the screen. You may continue to use the appliance,
but it is advised to perform the cycle as soon as possible.
Only use KRUPS cleaning tablets (XS 3000) (24). No liability shall be incurred for damages resulting from the use of
tablets of other brands. You can obtain cleaning tablets from the KRUPS After-Sales Service. Make sure to perform the
entire cleaning program to prevent any risk of poisoning.
The cleaning cycle is an intermittent cycle — do not place hands under the coffee spouts during the cycle.
The cleaning program must be performed approximately every 360 coffee preparations.
When a cleaning is necessary, the appliance advises you by displaying a pictogram in the central section of the
home menu. You may go to the maintenance section by pressing the key matching this same pictogram, which will
appear in the lower left-hand part of the home menu screen.
To perform the cleaning program, you will need a container that holds at least 0.6 L and a KRUPS cleaning tablet (XS
3000).
If you unplug your machine during cleaning or in the event of a power failure, the cleaning program will
resume at the step underway during the incident. It will not be possible to defer this operation.
This is mandatory for reasons related to water circuit rinsing. In this case, a new cleaning tablet may be
required.
When the "Cleaning required" message is displayed, you may start the automatic cleaning program by pressing OK.
Please follow the instructions displayed on the screen.
The automatic cleaning program is comprised of 3 parts: the cleaning cycle itself, and then 2 rinse cycles. This program
lasts approximately 20 minutes. You may perform a cleaning at any time by going to the maintenance menu and then
selecting COFFEE CLEANING.
33
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA860E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA860E in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info