590643

Krups EA8150 Manual

16
Zoom out
Zoom in
Previous page
1/43
Next page
2726
Rinsing the circuits :
Press the maintenance and settings button (27). The function indicator is shown above the mainte-
nance button .
If necessary, using the navigation button, select the rinse symbol .
Press START , rinsing starts and finishes when the coffee menu appears.
Automatic rinsing of the circuits when the machine starts.
■ You can choose to program the machine to be rinsed automatically each time it is turned on. To do this,
press the maintenance and settings button (27). Using the navigation button , select the automatic
rinsing programming symbol . Press the button to choose ON which confirms this program. If you
press the , button, automatic rinsing is disabled.
■ You can return to the coffee types menu by pressing the button.
Warning : after this rinsing process, hot water will be released from the coffee jet. Ensure that the drip tray
is in place even when the machine is not being used. The cycle lasts only a few seconds and stops automa-
tically.
Cleaning program - total duration: approximately 13 minutes
You do not have to run the cleaning program as soon as the appliance requests it, but it must be done rea-
sonably soon after. If cleaning is postponed, the alert message will remain illuminated until the process is car-
ried out.
■ When the symbol lights up, you can run the automatic cleaning program by pressing the maintenance
and settings button . The symbol is selected. The function indicator is shown above the
maintenance button .
■
the automatic cleaning program is divided into 2 stages: the cleaning cycle itself, followed by the rinse cycle.
You can clean the machine at any time by pressing the maintenance and settings button then, using the
navigation button select the cleaning symbol .
■ To run this cleaning program, you will need a container which holds at least 0.6 L and which can be placed
beneath the coffee jets and the steam nozzle. The symbol flashes.
■ Lift the cup grid (28).
■ Insert the KRUPS cleaning tablet (29).
■ Fill the water container to its maximum level of 1.7 L (2).
■ Empty the coffee grounds collector and the drip tray and clean the coffee drawer (23-24-25).
■ Put a 0.6 L container under the coffee and steam jets (30).
■ Press START . The symbol becomes constant. The first phase (approximately 10 minutes) begins.
When this phase has finished, empty the container and the drip dray. The symbol flashes. Put the parts
back in place.
■ Press START . The symbol becomes constant, the final phase (approximately 3 minutes) begins.
When this phase has finished, empty the container and the drip tray. The cycle has finished, the coffee
types menu appears.
Note: if you turn off or unplug your machine during cleaning or if there is a power failure, the cleaning program
will start from the beginning of the program once the power is restored to the appliance. It is not possible to
postpone this process. It is obligatory in order to rinse the water circuit. In this case, a new cleaning tablet
may be necessary. It is best to run the full cleaning program in order to avoid any risk of poisoning. The
cleaning cycle is irregular: do not put your hands under the coffee jets while the cycle is running.
Descaling program - duration: approximately 20 minutes
You do not have to run the descaling program as soon as the appliance requests it, but it must be done rea-
sonably soon after. If descaling is postponed, the alert message will remain illuminated until the process is
carried out.
The amount of limescale collected depends on the hardness of your water.
Warning : if your product is fitted with our Claris - Aqua Filter System cartridge, remove the cartridge before
descaling.
■ When the symbol lights up, you can run the automatic descaling program by pressing the maintenance
and settings button (27). If necessary, using the navigation button, select the symbol. The
symbol flashes and the function indicator is located above the maintenance button .
■ To run the descaling program, you will need a container which holds at least 0.6 L and a sachet of KRUPS
descaler.
■ Fill the water tank up to the CALC mark then pour in the contents of one sachet (31).
■ Put a 0.6 L container under the coffee and steam nozzles.
■ Press START to begin the first phase (approximately 8 min). The symbol becomes constant. When
this phase has finished, empty the container and the drip dray. The and symbols flash. Remove and
clean the water tank using a sponge.
■ Once clean, refill your water tank and replace all parts. The symbol disappears.
■ Press START to begin the second phase (approximately 6 min). The symbol becomes constant.
When this phase has finished, empty the container and the drip tray. The symbol flashes.
■ Press START to begin the final phase (approximately 6 min). The symbol becomes constant. When
this phase has finished, empty the container and the drip tray. Descaling is complete.
Note : if you turn off or unplug your machine during descaling or if there is a power failure, the cleaning
program will start from the beginning of the program once the appliance is restarted. It is not possible to
postpone this process. It is obligatory in order to rinse the water circuit. Running the descaling program is
advisable. The descaling cycle is irregular: do not put your hands under the steam jet.
Once the cycle has finished, the coffee types menu appears.
■ You can access the appliance’s OTHER FUNCTIONS menu by pressing the maintenance and settings
button .
■ For all settings, use the navigation button and + or – for the values.
■ To come out of the maintenance and settings menu, press the button.
MAINTENANCE
All of the following options allow you to run the selected programs:
OTHER FUNCTIONS
MAINTENANCE
Allows you to access rinsing.
Allows you to access cleaning.
Allows you to access descaling when the appliance requests it.
Allows you to prime the filter (Claris cartridge).
Return to coffee types menu.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8150 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8150

Krups EA8150 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info