Manual Krups EA80 serie - ESPRESSERIA AUTOMATIC (page 18 of 156) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

690027

Zoom out

Zoom in

1/156

Frothing milk

We recommend that you use pasteurised or UHT milk that has been recently opened. Untreated milk does not give

the best results.

Pour the milk into your milk jug. Immerse the nozzle in the milk - Fig. 12.

Initiate the steam function as explained in the paragraph above.

Once your milk is frothy enough - Fig. 13 - again press the button to stop the cycle.

To remove any milk traces from the steam nozzle, place a container under the nozzle and restart a preparation with

steam (around 10 seconds).

The steam nozzle can be removed for more intense cleaning. Wash it out with water and a little washing up liquid and

a small non-abrasive brush. Rinse and dry it - Fig. 14. Before putting it back, ensure that the air inlet holes are not

blocked by any milk residues. If necessary, unblock them using the needle supplied - Fig. 15.

Do not wash the steam nozzle in a dishwasher.

To interrupt the steam function, simply press any button.

If the nozzle is obstructed, unblock it with the needle provided.

Steam can be produced for a maximum of 2 minutes per cycle.

After the steam function has been used, the nozzle can be hot, and we recommend that you wait for a few

moments before handling it.

Auto-cappuccino XS 6000 Set (sold separately)

This auto-cappuccino accessory enables you to make cappuccinos or lattes - Fig. 16. Connect the different parts to

each other. Ensure that you do not pierce the pipe by keeping the button in the correct place.

After removing the lid, ll the jug with milk - Fig. 17 and place a cup or glass under the auto-cappuccino nozzle - Fig.

18. Select the cappuccino or latte position on the special nozzle - Fig. 19.

Start the steam, as indicated in the chapter ‘Making drinks with steam’.

Once you have made the milk froth, place your cup under the coffee outlets and start a coffee cycle - Fig. 20.

To prevent the milk from drying on the auto-cappuccino accessory, ensure that you clean it thoroughly. You are advised

to wash it immediately by running a steam cycle with the accessory jug lled with water in order to clean the inside of

the nozzle. You can use the KRUPS liquid cleaner for this, available separately.

MAINTAINING YOUR APPLIANCE

Emptying the coffee grounds collector and the drip tray.

If the light ashes,

Remove, empty and clean the coffee ground collector - Fig. 21.

Replace the coffee grounds collector – Fig. 22

Remove, empty and clean the drip tray - Fig. 23.

The drip tray is equipped with oats to indicate when it needs to be emptied.

Put all parts back in place.

As soon as you remove the coffee grounds collector, you will have to empty it completely to avoid any overow.

The light will remain on if the coffee drawer

(1)

area is not cleaned thoroughly and if the used grounds col-

lector is not pushed rmly into place or is incorrectly installed.

You cannot make espresso or coffee while the light is on or is ashing. The coffee grounds collector has a ca-

pacity of 9 coffees.

Rinsing of circuits

These 2 functions are available anytime, except if the appliance requests a ‘CLEAN’ and/or ‘CALC’ cycle.

Rinsing out the coffee circuit:

Place a container under the coffee nozzles. Press the button - Fig. 6 quickly to start a coffee circuit rinsing cycle,

which will automatically stop after around 40 ml.

my Krups EA80 is less than a year old and now the coffee has almost no crema Submitted on 27-5-2022 at 12:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA80 serie - ESPRESSERIA AUTOMATIC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups EA80 serie - ESPRESSERIA AUTOMATIC Manual

Product: