Manual Krups EA80 serie - ESPRESSERIA AUTOMATIC (page 16 of 156) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

690027

Zoom out

Zoom in

1/156

BEVERAGE PREPARATION

TYPES OF

COFFEE

Number of cups

possible

Possible volume

settings (ml)

Possible strength

settings

RISTRETTO

1 20 to 30 ml

2 x 1

2 x 20 to 30 ml

in two cycles

ESPRESSO

1 30 to 70 ml

2 x 1

2 x 30 to 70 ml

in two cycles

COFFEE or LUNGO

1 80 to 220 ml

2 x 1

2 x 80 to 220 ml

in two cycles

BEFORE FIRST USE

Preparing the appliance

Pull out and ll the water tank - Fig. 1 and 2.

Put it back in place by pressing rmly and close the lid again - Fig. 3.

Open the coffee bean container lid. Add the coffee beans - Fig. 4.

Close the coffee bean container lid again.

Do not ll the water tank with hot water, milk or any other liquid. If you turn on the appliance when the water

tank is not in place or not correctly lled (under the “min.” level,), the

light will come on and making an espresso

or a cup of coffee will be made impossible.

NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.

It is recommended that you do not use oily, caramelised or avoured coffee beans for this appliance. These kinds of

beans may damage the appliance.

Check that the coffee beans do not contain any foreign particles such as grit, as any damage caused by the presence

of foreign particles will invalidate the guarantee.

Do not put water into the coffee bean container.

Remember to t the drip tray to avoid waste water owing onto the work surface and staining it or scalding you.

Check that your water tank is clean.

Initialisation cycle - total duration: around 3 minutes

Turn on the appliance by pressing the button - Fig. 5. The light is constant.

Put a container with a minimum capacity of 0.6 litres underneath the two coffee outlets and steam nozzle.

Press the - Fig. 6 button: the appliance starts the initialisation cycle for rinsing of the steam and coffee circuits. The

light ashes.

The cycle is nished when the light becomes constant. The appliance is now ready to use.

It is preferable to rinse the 2 circuits out at least once after the appliance has not been used for several days. Each

time you plug your appliance in, it will carry out an initialisation cycle.

Preparing the grinder

You can choose the strength of your coffee by setting the coffee bean grinding neness. The ner the grinding setting,

the stronger and creamier the coffee should be. Set the desired neness for grinding by turning the ‘Grinding neness

setting’ knob.Turn to the left for ner grind. Turn to the right for coarser grind.

CHANGE THE SETTING DURING GRINDING.

Never force the grinding neness setting button.

my Krups EA80 is less than a year old and now the coffee has almost no crema Submitted on 27-5-2022 at 12:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA80 serie - ESPRESSERIA AUTOMATIC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups EA80 serie - ESPRESSERIA AUTOMATIC Manual

Product: