Manual Krups 866 (page 14 of 16) (English)

515883

14

Zoom out

Zoom in

Previous page

1/16

Next page

. The amount of freshly

brewed coffee deliver-

ed after the brewing pro-

cess willalways be

slightlyless than the

amount put into the

water chamber. This is

due to the minimal

absorption of the water

by the ground coffee.

Therefore, put in a little

more water to begin

withso that you will

have the number of

cups that you desire.

2. Place the glass carafe

with lidinposition on

the warmingplate.

3. Tum"on"your "ILCaffe

Grande" using the "Onl

Off' button. The indica-

tor lightwillilluminate

indicatingthat the brew-

ing process has begun

/see figure7).

4. As longas the red indi-

cator lightisilluminated

the coffee willbe k:ept

warm.

Stop'N Serve Feature

The Stop'N Serve feature is

KRUPS'answer to the

impatient coffee drinker's

clamor fora quick cup of

coffee! Thisdevice automa-

ticallystops the flowof

brewed coffee through the

tilter cone ifthe glass carafe

is removed fromthe warm-

ing plate duringthe brewing

cycle. Youhave about

20 seconds between the

removal ofthe carafe and it

being reinserted back onto

the warmingplate.

The Stop'N Serve device

closes offthe tilter cone so

effectivelythat there is vir-

tually no coffee-drip onto

the warmingplate. Once

the carafe is replaced, the

brewing process and the

flowofcoffee into the

carafe can be resumed.

CAUTION

Ifthe coffee DOES drip

onto the warming plate

after the removal of the

carafe, it is usuallyan indi-

cation that the seal in the

filterholder is missing or

defective. Inthis case call

the KRUPSConsumer

Service Department at

1-800-526-5377and they

can assist you.

Itis also possible that too

much ground coffee has

been placed inthe filter

paper. Thiscauses the

water that jets into the tilter

cone to overflowbetween

the filterand the sides of

the filtercone.

Ifthis blockage and subse-

quent dripping does occur,

put the glass carafe imme-

diately back onto the warm-

ingplate, and allowthe full

brewing cycle to run its

course. Do not swing out

the swiveltilter untilthe bre-

wingprocess is completed.

CLEANING

. Alwaysunplug this appli-

ance before cleaning.

Clean the filterbasket,

carafe, and lidina solu-

tion ofwarm water and

mildliquidsoap. These

parts can also be placed

inthe upper level of

your dishwasher away

from the heating and

dryingelement forsafe

effective cleaning.

. Never use scouring

agents.

. Never immerse the

appliance itself inwater.

Toclean, simplywipe off

witha soft, damp cloth.

. Never use a cloth to

clean inside of the water

chamber, as this might

leave fuzzydeposits in

the chamber. Just rinse

with cold water periodi-

cally.

DeCALCIFYING

Although your KRUPS cof-

fee maker has the most

advanced water heating

and pumping system, it will

periodically need cleaning

with a decalcifying agent.

. Thisis due to the cal-

cium (limestone) found

in drinking water.

. Insome areaswherethe

water is hard, you will

need to decalcify more

frequently than in areas

with soft water.

1

some how we have lost our coffe machines filter holder
I want to replace it . What is the suitable filter holder size for this machine 51- 54- 58 mm
would you please let me know the correct size .or Send me a drawing that how I can measure it
Hope to hear from you soon .
Sincerely Yours
Dr.Atilla USER Submitted on 20-1-2024 at 20:28
Reply Report abuse
- I hava already Downloded the manual for Krups 866
  I an very sorry I did not find any information for the size if you can find I will be very pleased to know the size
  HOPE YOU CAN HELP ME
  SINCEWRLY yOURS Answered on 23-1-2024 at 22:02
  Vote up Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Krups 866 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups 866 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info