Manual Krups 866 (page 12 of 16) (English)

515883

12

Zoom out

Zoom in

Previous page

1/16

Next page

DECALCIFYING

Under normal conditions

you do not need to decal-

cify your

"ILCafre Grande".

However, in areas where

there is hard water or if

used very frequently, we

recommend decalcifying,

especially if white deposits

can be seen in boiler cham-

ber. Decalcifier is widely

available and can be

purchased from KRUPS

Consumer Service Depart-

ment.

How To Decalcify

Please follow the procedure

listed below to decalcify

your machine:

. Turn machine "off' and

unplug the appliance.

Allow it to cool before

decalcifying.

. Remove filter holder,

glass carafe,and over-

,flowgrid from the

machine.

. Turn machine,comple-

tely upside down. With a

flat blade screw driver,

remove the brewing

head sieve by turning it

clockwise until the sieve

can be removed from the

machine (see figure 17).

. Turn machine upright

again and reinsert over-

flow grid into place.

. Dissolve the decalcifying

agent into 4 cups of

water. Pourthis solution

into the boiler container

and secure the boiler

cap.

. Place the glasscarafe

without the lid under-

neath the brewing head.

. Turnthe machine to the

" lr positionsothat

the solution will pass

through the water heat-

ing system into the glass

carafe.

. Allow the machine to

cool down after each

application.

. Repeat the above pro-

cess using clean, cold

water to remove all the

remaining solution in the

machine. Clean twice if

necessary.

PROBLEMSANDCAUSES

MAKINGESPRESSOOR

CAPPUCCINO

(Always check ifthe appli-

ance is plugged in and is in

the proper "On"position).

Problem:

1. Espresso leaking from

filter holder '

Cause:

. Filterholder not properly

inserted

. Filterholder not pushed

in farenough

. Internalgasket isdirty

and needs to be clean-

ed

. Gasket withoutelasti-

city, replace itwitha

new one

. Coffeepowdernot

cleaned off the edge of

the filter holder

Problem:

2. Espresso does not

come out

Cause:

. Nowaterin boiler con-

tainer

. Nocoffeeinfilter holder

. Filterclogged because

coffee is ground too fine

and or pressed down to

hard

Problem:

3. Steam does not come

out of steam nozzle

Cause:

. Nowateror not enough

water inthe boiler

chamber

. Steamnozzleisclogged

(see"Cleaning"section)

. Perfect Frothattach-

mentis clogged (see

"Cleaning

the Perfect

Froth")

Problem:

4. Not enough froth when

frothingthe milk

Cause:

. Perfect Froth attach-

ment touches the bot-

tom of the pitcher

. PerfectFrothtip is clog-

ged (see figure 14, part

A). See also section

"Cleaning the Perfect

FrothAttachment"

. Steam nozzle is clogged

(see "Cleaning")

1

some how we have lost our coffe machines filter holder
I want to replace it . What is the suitable filter holder size for this machine 51- 54- 58 mm
would you please let me know the correct size .or Send me a drawing that how I can measure it
Hope to hear from you soon .
Sincerely Yours
Dr.Atilla USER Submitted on 20-1-2024 at 20:28
Reply Report abuse
- I hava already Downloded the manual for Krups 866
  I an very sorry I did not find any information for the size if you can find I will be very pleased to know the size
  HOPE YOU CAN HELP ME
  SINCEWRLY yOURS Answered on 23-1-2024 at 22:02
  Vote up Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Krups 866 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups 866 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info