Manual Krups 866 (page 11 of 16) (English)

515883

11

Zoom out

Zoom in

Previous page

1/16

Next page

"

6. Tumthe three way

selector switch back to

the "..a" position to

finishmaking the

espresso.

7. Pourthe espresso intoa

cup which has a capa-

city of at least 5 ounces.

Add the steamed milkto

the espresso and spoon

on the frothed milk The

proportion between

espresso and milkis to

taste; inItalyit is nor-

mally1part espresso to

2 parts milkplus froth.

Steam Only

Ifyou onlywant to froth

milk,fillthe glass carafe

withwaterupto the "«!;)"

mark Thiswillgive you

approximately one minute

of steaming.

1. Pourthe water into the

water chamber and tum

the selector switch to

the" «!;)" position.

~ Place a cup under the

steam nozzle to collect

any water which may

escape. Assoon as you

start seeing steam,

move the selector

switch to the "0" posi-

tion.

3. Nowfollowsteps 2-7

and when finished froth-

ingthe milkreturn to "0"

position.

AlTENTION

The top closure of the Per-

fect Froth attachment (see

figure 14,part A)has a very

fine hole which draws air

into the milk Ifthis tiny hole

gets clogged, "Perfect

Froth" willnot work pro-

perly. Therefore, never

immerse the top closure in

milk

or froth.

CLEANING

Before cleaning, turn "off'

the machine, unplug it, and

allow it to cool down.

The filter holder, filter bas-

ket, carafe, carafe lid, and

overflow grid can be put in

the dishwashers upper

rack, away from the heat-

ing/drying element.

The machine can be wiped

clean by using a damp

cloth. Never immerse the

body of your "ILGaffe.

Grande" in water or any

other liquid. Clean the

brewing head with }idamp

cloth and remove ~round

coffee. If there is water left

in the boiler chamber, let

the machine cool down,

remove all loose parts and

empty through the top

opening by tuming upside

down.

Cleaning The Steam

Nozzle

Clean the steam nozzle

each time after you have

immersed it in the milk,

otherwise the inside of the

nozzle becomes clogged

and the milk deposits on

the outside harden and

become difficult

to remove.

Ifclogging does occur,

unscrew the tip' of the

steam nozzle (see figure

15). Remove all milk par-

ticles using a sewing

needle and rinse under the

faucet. Replace nozzle tip

making sure to screw it on

tightly.

Wipe offthe outside of the

nozzle with a wet cloth.

Holdthe wet cloth very

close to the tip of the

nozzle and turn

the selector

switch to the"@". Let the

steam escape into the wet

cloth for one or two

seconds. Any milk residue

will then be flushed

out.

Then return to the "0" posi-

tion.

Cleaning The Perfect Froth

Attachment

For a thorough cleaning of

the "Perfect Froth" attach-

ment, remove part C (see

figure 14).All parts should

be rinsed'in warm water. If

the small suction opening in

part A is clogged up, it can

be opened with afine

needle.

Cleaning The Drip Tray

The overflow grid can be

cleaned by removing the

grid (see figure 16).

CAUTION

DO NOT try to open or

disassemble the main body

of the machine.

1

some how we have lost our coffe machines filter holder
I want to replace it . What is the suitable filter holder size for this machine 51- 54- 58 mm
would you please let me know the correct size .or Send me a drawing that how I can measure it
Hope to hear from you soon .
Sincerely Yours
Dr.Atilla USER Submitted on 20-1-2024 at 20:28
Reply Report abuse
- I hava already Downloded the manual for Krups 866
  I an very sorry I did not find any information for the size if you can find I will be very pleased to know the size
  HOPE YOU CAN HELP ME
  SINCEWRLY yOURS Answered on 23-1-2024 at 22:02
  Vote up Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Krups 866 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups 866 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info