390656
9
Zoom out
Zoom in
Previous page
1/52
Next page
900 WTSE English
9
Always store grinding discs such that they are pro-
tected against damage.
Before placing the machine down anywhere,
switch it off and wait for it to come to a standstill.
The grinding tools continue to run a little after
switching off.
The mains receptacles in the working area must
be protected by a residual current circuit
breaker (RC).
Do not drill holes into the housing to label the
machine. The protective insulation will be bridged.
Please use self-adhesive labels.
Measured values determined according to EN 50 260.
Sound pressure level: 82.5 dB (A)
Sound power level: 95.5 dB (A)
Work place emission value: 85.5 dB (A).
For operation, noise protection measures are
required.
The acceleration measured is usually less
than als 2.5 m/s
2
.
1
ON/OFF switch
2
Latch for mains cable module
3
Ventilation slots
4
Auxiliary handle
5
Protective guard
6
Roughing/cutting disc
7
Clamping flange
8
Quick-lock nut
Not all of the accessories illustrated or described are
included as standard delivery.
Before any work on the machine itself, pull the
mains plug!
Assembling the auxiliary handle
Place the clamping strap around the gearhead and
insert it in the openings on the clamping part of the
auxiliary handle. The auxiliary handle is locked by
turning it clockwise. In so doing make sure that the
notches on the supporting part grip in the groove on
the machine housing.
Adjusting the auxiliary handle
By turning the handle anticlockwise, the fixture is
unlocked. The auxiliary handle can be turned to the
required position. By turning the auxiliary handle
clockwise, it is locked again.
Connect the mains cable module to the handle. The
plug must latch.
Use the mains cable module provided only for
Kress Electro-Tools. Do not attempt to operate
other machines with the module.
Only use original Kress mains cable modules and at
least flexible rubber tube (code designation
H05 RR-F).
3 Noise/vibration information
4 Technical Data
Angle Grinder 900 WTSE
Article number 06 05 1401
Input power 900 Watt
Output power 490 Watt
No-load speed 9500 RPM
Speed under load 7500 RPM
Grinding discs Ø max. 125 mm
Cutting depth max. 32 mm
max. peripheral velocity for
roughing and cutting discs 80 m/s
Disc chucking bore Ø 22 mm
Grinding spindle thread M 14
Weight approx. 1.75 kg
Safety class
II/
5 Illustration
6
Mounting the Auxiliary Handle and
the Mains Cable Module
900 WTSE - Buch Seite 9 Donnerstag, 28. Juni 2001 2:52 14
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress wts 900 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress wts 900 e in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info