819060
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
Cordless Lawn Mower KG756E KG756E.X
and fold the handle bar.
MAINTENANCE
WARNING: Stop the mower and unplug the
safety key and remove the batteries before
removing the grass collection bag.
NOTE: To ensure long and reliable service, perform
the following maintenance procedures regularly.
Check for obvious defects such as a loose, dislodged
or a damaged blade, loose ttings, and worn or
damaged components. Check that the covers and
guards are all undamaged and are correctly attached
to mower. Carry out any necessary maintenance or
repairs before operating mower. If the mower should
happen to fail despite regular maintenance, please
call our customer helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER
PERFORMANCE. A DULL BLADE DOES NOT CUT
GRASS CLEANLY OR MULCH PROPERLY.
WEAR PROPER EYE PROTECTION WHILE
REMOVING, SHARPENING, AND INSTALLING
BLADE. ENSURE THAT SAFETY KEY IS
REMOVED.
Sharpening the blade twice during a mowing season
is usually sufcient under normal circumstances.
Sand causes the blade to dull quickly. If your lawn
has sandy soil, more frequent sharpening may be
required.
REPLACE BENT OR DAMAGED BLADE
IMMEDIATELY.
WHEN SHARPENING THE BLADE (See Fig. K)
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade to
keep
it balanced, removing equal amounts of material from
both ends.
NOTE:
1. Be sure the mower is turned off and unplug the
safety key, remove the batteries.
2. Place the mower in stand up storage mode.
BLADE BALANCING (See Fig. L)
Check balance of blade by placing center hole in
blade L-1 over a screwdriver shank L-2, clamped
horizontally in a vise L-3. If either end of the blade
rotates downward, le that end. Blade is properly
balanced when neither end drops.
BLADE MAINTENANCE (See Fig. M, N)
Replace your Mower Blade after 50 hours mowing
or 2 years, which ever is the sooner-regardless of
condition.
Follow these procedures to remove and replace the
Blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the Blade.
Make sure safety key and batteries are not installed.
Wedge a block of wood between the blade and the
mower deck to prevent the blade from turning and
unscrew the Blade Bolt counter-clockwise using a
spanner wrench, and then remove the Blade.
To re-assemble, position the Blade with the cutting
edges towards the ground. Then securely tighten the
Blade Bolt.
TROUBLESHOOTING
PROBLEM SOLUTION
1. Mower
doesn’t run when
Operating Bail is
activated.
A. Check to make sure
safety key has been installed
and is fully seated and
thatSafety lock-out button is
being completely pushed.
B. Release Operating Bail to
turn mower off. Unplug the
safety key and remove the
batteries, turn mower over
and check that blade is free
to turn. If not free, return to
an authorized servicer. Blade
should turn freely.
C. Has battery been fully
charged? Plug in charger
and wait for green light to
come on. For starting, press
both the Safety lock-out
button and the Operating
bail at the same time.
(See Fig.G1)
2. Motor stops
while mowing.
A. Release Operating Bail to
turn mower off. Unplug the
safety key and remove the
batteries,turn mower over
and check that blade is free
to turn. If not free, return to
an authorized servicer. Blade
should turn freely.
B. Raise cutting height of
wheels to highest position
and start mower.
C. Has battery been fully
charged? Plug in charger
and wait for green light to
come on.
D. Avoid overloading the
mower. Slow down the
cutting pace by pushing
mower slower or raise the
cut height. Or both.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KG756E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KG756E in the language / languages: English as an attachment in your email.

The manual is 10.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info